Your vehicles as they sit now!

My best guess is Marc realized how shitty NNBS are, so he got this older NBS to fill the void in his life.

Now we are just waiting for him to realize and sell NNBS
 
How bad does it rub because it actually looks much better than expected

since the tires are quite skinny, they hardly rub i pulled some pf the plastics back with a zip tie and trimmed the valance and the corner.

will get fender measurements later today.

I thought you were saving to buy a house. Why do you have 2 trucks lol

cause i want to be baller like you :okay:

My best guess is Marc realized how shitty NNBS are, so he got this older NBS to fill the void in his life.

Now we are just waiting for him to realize and sell NNBS

this is basically it.
 
No, just do bumper plastics and tailgate handle white. Leave tailgate spoiler black to keep the flow

Sent from my SM-G900V using Tapatalk
 
No sound in that video, champ. But my truck made a grinding noise due to low PS fluid. Check that first.


Sent from my iPhone using Tapatalk
 
Started getting this God aweful steering noise yesterday at low speeds. Can hear inside and outside. Any ideas?

https://youtu.be/DfI_KJIE5HU

Sent from my SAMSUNG-SM-N920A using Tapatalk

my 07 nbs makes the same noise, it sounds like rubber rubbing on the steering shaft.

i am going to spray some lithium lube around the steering shaft and stuff to see if i can get rid of it.
 
I thought about it but my bedliner goes over my rails so it'll look off imo

No, just do bumper plastics and tailgate handle white. Leave tailgate spoiler black to keep the flow

Sent from my SM-G900V using Tapatalk
Fgt tapa wouldn't upload a pic earlier. But like dis
e0f8fa8dd2e37c118903d876ca6e8082.jpg


Sent from my SM-G900V using Tapatalk
 
Fgt tapa wouldn't upload a pic earlier. But like dis
e0f8fa8dd2e37c118903d876ca6e8082.jpg


Sent from my SM-G900V using Tapatalk

Hmm... I do like how it all matches everything leveled with the bed caps up. From the window trim, fin, and two black things on the back.

Something about that spoiler cap bugs me. If it were smooth it'd tie in better imo

I don't like the smooth cap. I like the 1500 cap better but that's just me.
 
Something about that spoiler cap bugs me. If it were smooth it'd tie in better imo
Idk why, but I've always loved this one and hated the smooth one. Gmcs have the smooth one stock, I swapped them
Hmm... I do like how it all matches everything leveled with the bed caps up. From the window trim, fin, and two black things on the back.



I don't like the smooth cap. I like the 1500 cap better but that's just me.
IMO. I like how other than the tires the only black is on the upper part of the truck. It'll tie in even better when I do my black B-pillars for the big window mod

Sent from my SM-G900V using Tapatalk
 
Idk why, but I've always loved this one and hated the smooth one. Gmcs have the smooth one stock, I swapped them

IMO. I like how other than the tires the only black is on the upper part of the truck. It'll tie in even better when I do my black B-pillars for the big window mod

Sent from my SM-G900V using Tapatalk
Where'd you get your license plate bolts? I wanna be cool too

sent from my glade air freshner
 
If you want bolts, in the past I've just gotten license plate mounting kits at the parts store with those little white square inserts and hardware.

If you want spikes like I've got now, my buddy got them for me off ebay. Just type in "license plate spikes" or "tag spikes". They're 1 3/4" long, and have a threaded stud with an Allen key in the end. I just ran that stud into the spike as hard as I could with some blue loctite. Then threaded them into the white tag squares that I already had. They're not long enough for nuts on the backside, but they cut new threads in the plastic. Been there for a month now and haven't gotten loose

Sent from my SM-G900V using Tapatalk