Samuels 05 sierra crewcab build
- Thread starter Samuel6731
- Start date
Well just a made purchase from a local friend.
Worked/milled 243 heads W/ springs. LS7 lifters. and new LS2 trays.
8.1 Injectors
Also bought a TBSS 90mm intake from James on here.
Will be ordering the camp turnion upgrade for the heads since i plan to spin the shit out of that motor.
Will have pictures when I go to pick up everything this weekend and the trucool install.
Worked/milled 243 heads W/ springs. LS7 lifters. and new LS2 trays.
8.1 Injectors
Also bought a TBSS 90mm intake from James on here.
Will be ordering the camp turnion upgrade for the heads since i plan to spin the shit out of that motor.
Will have pictures when I go to pick up everything this weekend and the trucool install.
I will have some PRC .625 single springs for sale. 500 miles on them. Ill pull them out the heads when i get them because im still wanting to use my dual .660s for my higher lift cam
epper:
haha, was gonna ask a arm and a leg for them since they are used.
He wont pull them out the heads and lower the price so i have to buy the heads for the price he wants with the springs.
He wont pull them out the heads and lower the price so i have to buy the heads for the price he wants with the springs.
did order a bullydog watchdog too so i can keep any eye on the tranny temps with this big converter
Well made it out today to scoop up parts from my local friend.
#799 heads. Same as 243 different manufacture location and non sodium filled valves.
worked by a local shop, performance valve job, back cut valves, bowl blending, milled .032, some work on the short turn radius. (500 miles on them since the work)
You can see where it has been worked and smoother.
LS7 lifters and LS2 tray (500 miles on them)
some 8.1 liter injectors, good enough for my setup since i plan to do a small shot of N2O eventually (500 miles)
the reg tru-cool 40k
Misc shit pile is growing, O2 sensors came in too.
Going get my TBSS 90MM intake tomorrow from my grandparents since i ship everything there, it was delivered today just have not picked it up yet.
Shout out to James for holding it for me and quickly shipping :shake:
AWAITING (already ordered not delivered):
head and manifold gaskets
head bolts
bullydog watchdog
COMP Cams Rocker Trunion upgrade kit
Vic @ Va specialties Trac bars (same as cal tracs just cheaper)
other MISC parts
#799 heads. Same as 243 different manufacture location and non sodium filled valves.
worked by a local shop, performance valve job, back cut valves, bowl blending, milled .032, some work on the short turn radius. (500 miles on them since the work)
You can see where it has been worked and smoother.
LS7 lifters and LS2 tray (500 miles on them)
some 8.1 liter injectors, good enough for my setup since i plan to do a small shot of N2O eventually (500 miles)
the reg tru-cool 40k
Misc shit pile is growing, O2 sensors came in too.
Going get my TBSS 90MM intake tomorrow from my grandparents since i ship everything there, it was delivered today just have not picked it up yet.
Shout out to James for holding it for me and quickly shipping :shake:
AWAITING (already ordered not delivered):
head and manifold gaskets
head bolts
bullydog watchdog
COMP Cams Rocker Trunion upgrade kit
Vic @ Va specialties Trac bars (same as cal tracs just cheaper)
other MISC parts
Last edited:
Went get manifold, 90mm tbss
Going to start hacking this thing up and cleaning it up. Thinking about smoothing it all out and running no engine cover.
DAT TOASTER DOE :umad:
Going to start hacking this thing up and cleaning it up. Thinking about smoothing it all out and running no engine cover.
DAT TOASTER DOE :umad:
Last edited:
lolz all yours if you want them.
Whenever i pull them to install mine Ill let you know
well its a POSSIBILITY that while everyone is gone to Lone Star throwdown in texas this weekend, me and a friend might tear into her and start cam/head/mani swap.
still waiting for a few packages from a few different places that also plays a factor if ill be able to do it this weekend.
still waiting for a few packages from a few different places that also plays a factor if ill be able to do it this weekend.
I'm curious what that watchdog is all about. You'll have to let us know what you think about it. Is it just an OBD port gauge? I've been running the Aeroforce interceptors for year so I haven't really checked the market for other stuff recently...
Should try to port match your intake and gasket to the heads too while they are off.
Should try to port match your intake and gasket to the heads too while they are off.
Ha well what's the edge insight? Similar thing? You not a fan of the bully dog one?
I have also been eyeballing that zeitronix unit that can also read from 2 or 3 other sensors for a total of 4 readouts. Might fit in my console extension pocket...
I have also been eyeballing that zeitronix unit that can also read from 2 or 3 other sensors for a total of 4 readouts. Might fit in my console extension pocket...
Its just a OBD2 scanner. Same monitor as the tuner just without the tuning capabilities.
Peyton, thats fine both of your gauges are really nice. However I paid a fraction of the cost. Your Aeroforce is wayyyyy to small for me and expensive. The edge was more than i was willing to pay also. The sole reason for me buying one of these is to only watch my transmission temperature. I can also read and and display anything the insight would too.
Sure its not as nice but itll get the job done for what i need. Ima get it and update it I already downloaded the latest firmware from bullydog.