Anybody got pictures of that crew cab that had tbss truck color is like brown I think but is know lifted?
Static NNBS (GMT-900 07-13)
- Thread starter Smith
- Start date
Does anyone know stock fender to hub measurements on a nnbs ('13) rcsb?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Few questions,
What is the tallest diameter tire you can still fit on these trucks with a 4/7 drop? Wheel offset is +31 or +32
For instance my 275/55/20s I used to have measured out to be 31.9" and still fit, they hit in the rear on large bumps but other than that weren't too bad.
The rest of the measurements for the 275/55/20's were...
Sidewall: 6.0 inches
Radius: 16.0 inches
Circumference: 100.2
I am asking because I have been looking at wheels on craiglist and trying to avoid a too large of tire.
Do any of you thing a 305/45/22 could squeeze in there? If not what size is the largest you'd think would fit. The 305/45's measure..
Sidewall: 5.4
Radius:16.4
Diameter: 32.8
Circumference: 103.1
What is the tallest diameter tire you can still fit on these trucks with a 4/7 drop? Wheel offset is +31 or +32
For instance my 275/55/20s I used to have measured out to be 31.9" and still fit, they hit in the rear on large bumps but other than that weren't too bad.
The rest of the measurements for the 275/55/20's were...
Sidewall: 6.0 inches
Radius: 16.0 inches
Circumference: 100.2
I am asking because I have been looking at wheels on craiglist and trying to avoid a too large of tire.
Do any of you thing a 305/45/22 could squeeze in there? If not what size is the largest you'd think would fit. The 305/45's measure..
Sidewall: 5.4
Radius:16.4
Diameter: 32.8
Circumference: 103.1
Last edited:
Definitely wouldn't try to squeeze a 305/45/22 in there..you will have rubbing issues lol
305/40/22 is .30" shorter than a 275/55/20 so I definitely wouldn't go any bigger than that :imo:
Yeah, that's what I was thinking with them being nearly 33". I'm waiting to see what size tire it is on the wheels and crossing my fingers it's a 305/40 and not 45. Found a good deal on some 22's but couldn't tell the tire size on them. Was just wondering if anyone had tried a 305/45 or not and if it fit just incase that was the size of the tire.
Bumper was a pain in the ass to put on. Hd front end swap thread did me no help I just ended up modifying the stock bracket the ones that came with the bumper didnt fit on the frame.
Takes a little creative thinking for sure. It's a lot different doing it than just looking at a thread lol
How? There's like no way in hell those stock brackets would of worked for me..
I flipped the Hd brackets upside down and move it over a tad.. Used 2 bolts on each bracket..
Took the frame horn off the frame and attached to bumper then put entire bumper back on.. Mine doesn't sit too flush on the sides though.. Need to fuck with it more I guess..
Well I really didnt modify it I basically did what you did flipped the Hd bracket but the bracket
from the frame was hitting on one bolt so what I did was leave one on in just weld the side that I took
the bolt off in everything basically went into place. Shitty way but still worked
Decided not to go with the other wheels. Found another set with 285/45/22's with a +31 or 32 offset. That tire measures out to 32.1" Anyone think I'll have a problem with this? The 275/55/20's were 31.9 and they fit fine so I figure that 2/10ths of an inch wouldn't be a deal killer.