Your vehicles as they sit now!

Emery19 said:
hey ayyron. i'm going to preface what im going to say with, im not bashing and i love your truck sitting on the preds but...



Corny and Temoney and a few others work their trucks and they're still minty fresh. gotta step your game up son
Click to expand...

they're trucks are also purpose built and I doubt they are able to keep them clean all the time. If I had a long bed hd, i would be more comfortable with it.
 
66bd2cd22731cc180b58e48df7518af2.jpg



Sent from the 4.hate using tapaturd
 
Jake747 said:
The first time in Sept it dropped the valve and the piston quickly shoved it out of the way. No significant damage to the piston though but a new head was required. This time no, valve is great. Most likely broke the rocker at idle, I assumed ignition issues so I swapped coil packs, plugs, metered all plug wires, all coil pack wiring to the ECM, all engine and ECM grounds then finally pulled the cover. Assuming that while turning over (not starting) the rocker broke the spring. All pieces accounted for and switching all springs out to BTR platinum springs. Should be back up and running when I get back from Alaska and have some actual time to work on it.
Click to expand...

You do all that in the Hail burnout? :lol:
 
Jake747 said:
The first time in Sept it dropped the valve and the piston quickly shoved it out of the way. No significant damage to the piston though but a new head was required. This time no, valve is great. Most likely broke the rocker at idle, I assumed ignition issues so I swapped coil packs, plugs, metered all plug wires, all coil pack wiring to the ECM, all engine and ECM grounds then finally pulled the cover. Assuming that while turning over (not starting) the rocker broke the spring. All pieces accounted for and switching all springs out to BTR platinum springs. Should be back up and running when I get back from Alaska and have some actual time to work on it.
Click to expand...

i cant believe people run those rockers with a high pro setup, i figured most people would upgrade rockers at the same time.

i have Jesels in my 358 motor.
 
Ginger said:
i cant believe people run those rockers with a high pro setup, i figured most people would upgrade rockers at the same time.

i have Jesels in my 358 motor.
Click to expand...

Nothing wrong with OEM rockers so long as the trunion upgrade is done. You're not gaining anything for the extra $500 + out of pocket IMO.
 
You must log in or register to reply here.
Top Bottom