Your vehicles as they sit now!

[Adjusted]

im not made out of money haha, but i love them :spendmonies:

no, i mean like they arent even made in a 20"

Edit again: they do...

 

[No1Limit]

ugh, seriously thinking about those renegades as my next set of whills, looks great man

Edit: no 20"? :tableflip:

The 20's would have cost me soooo much moar

 

[Adjusted]

The 20's would have cost me soooo much moar

how much did they quote you for a set of the 20s, if ya dont mind

 

[No1Limit]

I got em off ebay, 610 shipped to college. but mostly for tire size, dnw to pay 100 more per

 

[fortplainman]

not sure if you would know but how easy is it to get that backing plate where the 7-round is mounted on off? mine has a rust bubble and i wanna either make a new one or try and repaint it.

 

[static06]

Put chrome caps on and will be sanding the textured ones soon

 

[Jordan]

not sure if you would know but how easy is it to get that backing plate where the 7-round is mounted on off? mine has a rust bubble and i wanna either make a new one or try and repaint it.

The trailer harness plug backing plate? It's part of the bumper... you have to take the middle plastic section off to get access to it. Do that, sand it down, and repaint, prawfit.

 

[Jordan]

Rode my bike to work today because I was so anxious to get it out, froze my ass off this morning.

 

[fortplainman]

The trailer harness plug backing plate? It's part of the bumper... you have to take the middle plastic section off to get access to it. Do that, sand it down, and repaint, prawfit.

hopefully it isnt too hard to get to, thanks.

 

[Jordan]

hopefully it isnt too hard to get to, thanks.

It isn't, I'd just take all the plastic off to get to it so you can clean underneath them while you're at it. Get under there with a pair of pliers to squeeze the clips together and the caps just pop right off. <10 minute job. There isn't, however, an easy way to completely take off the middle section since the spare tire crack piece doesn't go through the plastic. When I had my plastic painted, I had to cut around it with a dremel to get it off. I think you should be able to lift it up/pull it away enough to sand/paint the metal behind it though.

 

[Ginger]

Rode my bike to work today because I was so anxious to get it out, froze my ass off this morning.

fuck that, it was cold here today, i cant imagine up there.

 

[Jordan]

I had a hoodie, my jacket, gloves, helmet, and thermal underwear on under my pants all on and I still froze :rofl:

 

[Jared]

Just not one for simply removed eyesores :imo:

It isn't an eyesore to me, I don't even pay attention to it.

this is how mine is: matched up front, red in rear - it flows with the red tails pretty well

word, never been bothersome to me. The only reason why I am removing eventually, is I wanted the gate clean. I'm getting a new cap and painting it white.

 

[fortplainman]

It isn't, I'd just take all the plastic off to get to it so you can clean underneath them while you're at it. Get under there with a pair of pliers to squeeze the clips together and the caps just pop right off. <10 minute job. There isn't, however, an easy way to completely take off the middle section since the spare tire crack piece doesn't go through the plastic. When I had my plastic painted, I had to cut around it with a dremel to get it off. I think you should be able to lift it up/pull it away enough to sand/paint the metal behind it though.

yeah when i took my spare off i ripped that pipe off lol. thanks for the info.

 

[bgray]

Needed aq good wash, fucking hawk pads throw so much dust. Got a new intake comming for the truck too

 

[fortplainman]

is that the truck that is getting the TVS?

 

[Dakota]

is that the truck that is getting the TVS?

That's the "new intake" imo lol

 

[Col 10]

First at work this morning

 

[Alecks]

 

[static06]

Damn what happened