Your vehicles as they sit now!

What do you know....still raining
05cb1f9c92405dc0b6c5b80a4b5ea3d8.jpg
 
So I was driving my truck an I could hear something not right from the driver front end. Its not a hub. Noise continued as I turned either direction. My guess is my front axle. Both boots have been ripped for awhile. Found out when I did the drop. Could I run without them till I can afford to replace them?
 
dszx13 said:
So I was driving my truck an I could hear something not right from the driver front end. Its not a hub. Noise continued as I turned either direction. My guess is my front axle. Both boots have been ripped for awhile. Found out when I did the drop. Could I run without them till I can afford to replace them?
Click to expand...
make the broken one a stub shaft incase your hub goes out, i ran with just 1 axle for a few weeks.

Sent from my VS985 4G using Tapatalk
 
racer36 said:
make the broken one a stub shaft incase your hub goes out, i ran with just 1 axle for a few weeks.

Sent from my VS985 4G using Tapatalk
Click to expand...
I need both. Lol. But I can only hear driver side currently. Im gonna jack it up tmw an see if that is it. Only thing I can think of
 
probably not, i just did it as a safety because i didnt know how old the hubs were and 2" spacers

Sent from my VS985 4G using Tapatalk
 
Don't you need the axle stub to keep everything together? Otherwise the hub bearing will only last like 3 feet before it eats itself. I think I read that on here

sent from my glade air freshner
 
Yep, you need the outer part of the axle to keep the hub together or you'll be missing a wheel very quickly lol

Sent from a dingleberry
 
You must log in or register to reply here.
Top Bottom