Post your detailing products review!

[Ginger]

a full detail you should be able to do it with one pad of the color needed.

if the paint is really fucked up you may need 2 of each color

 

[2005_Silverado]

i use and love power cones. Just dont go too fast or the glue will heat up and the pad will fly off.

this...I used a cone and was bamf....also used adams blue metal polishing pad for flat surfaces. I bought a $15 corded drill from HF for when I wanted fast polishing.

 

[okbeast]

a full detail you should be able to do it with one pad of the color needed.

if the paint is really fucked up you may need 2 of each color

Werd. I may be using too much polish then as the pads seem to get gunked up sometimes.

 

[SamCarroll]

a full detail you should be able to do it with one pad of the color needed.

if the paint is really fucked up you may need 2 of each color

:uhoh: DNW one pad for whole vehicle

 

[Ginger]

:uhoh: DNW one pad for whole vehicle

i havent had any issues i make sure the pad isnt clogged or dirt as i go.

 

[Big Tex]

for the wheels i got this little polishing kit off of amazon that goes on a dremel

i use and love power cones. Just dont go too fast or the glue will heat up and the pad will fly off.

:hmm:

:uhoh: DNW one pad for whole vehicle

I've heard 4-5 pads per step is ideal depending on the size of the vehicle

 

[slicksierra]

Wow I'm with ging I did my whole truck with one mf and one foam pad. But maybe that's why I'm having micro marring issues

 

[TechieTruckGuy]

100 percent agree with Sam. You should be using multiple pads for a vehicle.


Sent from my Stealth Lookin iPhone using Tapaturd

 

[Big Tex]

Going to grab this for wheels..

http://www.amazon.com/gp/aw/d/B000H...200_QL40&qid=1415059960&sr=8-2#ref=mp_s_a_1_2

 

[jonmx477]

I've done a vehicle with one pad per step but it sucked, was cleaning the pad a ton and could tell it was not correcting much. I've been doing (1-2) 3.5" pads and (1) 7" pad per step now and that seems to be working well.

 

[Jordan]

You guys see this?

Chemical Guys BUF_501X - TORQ® 10FX Random Orbital Polisher Kit (9 items)

 

[DeanH1290]

Why do I have to be broke? Looks like a hell of a deal.

 

[slicksierra]

Looks like a rupes clone with less throw

 

[slicksierra]

Looks like a rupes clone with less throw

Also down on power and speed. My GG6 has 150 more watts, spins up to 6800 rpm and starts at 130 bucks

 

[wretched73]

I have wolfgangs sealant 3.0 on my truck:

1- it looks better than adams paste wax and almost as good as blackfire midnight sun
2- its been on about 4 months and water still beads and the salt has not seemed to effect it

Its going on really easy, comes off really easy, and is holding up very well.

10/10 would buy again

 

[j.mo]

I have wolfgangs sealant 3.0 on my truck:

1- it looks better than adams paste wax and almost as good as blackfire midnight sun
2- its been on about 4 months and water still beads and the salt has not seemed to effect it

Its going on really easy, comes off really easy, and is holding up very well.

10/10 would buy again

WGDGPS is the shit! I love that stuff

 

[slicksierra]

Sonax polymer net shield is my new favorite. Even over the coating I have on. Might be the only sealant I buy again good gloss but how it reacts to water is crazy

 

[SamCarroll]

Sonax polymer net shield is my new favorite. Even over the coating I have on. Might be the only sealant I buy again good gloss but how it reacts to water is crazy

love dat shit. love it works on plastic too

 

[slicksierra]

love dat shit. love it works on plastic too

Wattttt about to go strip and coat plastics with it does it keep them black?

 

[slicksierra]

I used it just like the method showcased here spray directly on panel and buff off with a damp microfiber worked awesomeeee so fast too http://youtu.be/h6pi6qKXdLo