official aSSmeister build
- Thread starter Bassmaster
- Start date
Started getting busy again so I'll bump. Since the last, I've painted the brakes and got braided hoses, painted a couple pieces in interior, got a locking tailgate bezel, new windshield, mounted up and got my fogs working, and made moves on a bunch of others.
On my plate now
31" led bar
Finish console (wire the led bar and back up cam to it, Mount up Camara and install)
Cut up this hitch thing to a flat square, which I'll mount the camera to from the inside. It's easily removable for use of hitch
Had these sitting around for a while. Planned on two being under hood lights and four along inside bed rails
Plus 35% windshield, suede headliner & door inserts, get black carpet, paint some plastic under the hood
Some work from today. Finished up suede and sides back together
Little Fog s-brackets I made
On my plate now
31" led bar
Finish console (wire the led bar and back up cam to it, Mount up Camara and install)
Cut up this hitch thing to a flat square, which I'll mount the camera to from the inside. It's easily removable for use of hitch
Had these sitting around for a while. Planned on two being under hood lights and four along inside bed rails
Plus 35% windshield, suede headliner & door inserts, get black carpet, paint some plastic under the hood
Some work from today. Finished up suede and sides back together
Little Fog s-brackets I made
Last edited:
Plz tell me where else that guy can go along the center, all clean and hidden like, without cutting into anything.. The plastic comes out in literally 1.35 seconds . Plus i could see how close/lined up the trailer is at eye level. Bootstrap had something similar and noone gave him shit :crossarms:
Plus, I'm buying a Kenwood ddx470 with all the wires, wheel controls, mounts, and another back up cam for $300. I'll join this century with Bluetooth, but lose my nav I never use. Can't wait lol. I'll use his camera on the plate, hooked up to the head unit.. Then the hitch one hooked up below to the console monitor :datass:
Plus, I'm buying a Kenwood ddx470 with all the wires, wheel controls, mounts, and another back up cam for $300. I'll join this century with Bluetooth, but lose my nav I never use. Can't wait lol. I'll use his camera on the plate, hooked up to the head unit.. Then the hitch one hooked up below to the console monitor :datass:
Last edited:
How you gonna hook up to a trailer with a camera in the receiver? Put a flush mount camera in the license plate imo.
:read:
Before I found that thing I was gonna make a bracket for it to peek over the top of plate, but this works cause I'll rock the duals now
Plz tell me where else that guy can go along the center, all clean and hidden like, without cutting into anything.. The plastic comes out in literally 1.35 seconds . Plus i could see how close/lined up the trailer is at eye level. Bootstrap had something similar and noone gave him shit :crossarms:
Plus, I'm buying a Kenwood ddx470 with all the wires, wheel controls, mounts, and another back up cam for $300. I'll join this century with Bluetooth, but lose my nav I never use. Can't wait lol. I'll use his camera on the plate, hooked up to the head unit.. Then the hitch one hooked up below to the console monitor :datass:
Have same camera, no problems with it at all.
Good deal. Might try to paint the housing black. Depends how much that dark chrome sticks out
Please don't paint it, just leave it imo.
I actually thought about doing that, just have it hooked to a switch so I could turn it on and off. :rofl:
I actually thought about doing that, just have it hooked to a switch so I could turn it on and off. :rofl:
Imfo. I mostly want to do it because my shit is low and I get tired of ripping valances off.
Sent from my SM-N900V using Tapatalk
Finally put the caliper stickers on I bought one year ago while I went to plug a tire and rotate them
There's a short fat one for front, and long skinny for rear.
How rear should be
Didn't pay attention and mixed the driver side up.. Fuk
The leaking tire wasn't a simple plug like I hoped. Shits leaking through the bead slowly. Fuk.
Rotated, set back down, tightened, finished up, realized I didn't rotate the pass side. Fuk. Oh well gotta take leaker off anyway and dismount sometime. Fuk.
Also, when lowering driver side front I slid the stand out, lowered jack to hear a CHRRRunch. Mfer. Didn't pull jack far enough out and the truck landed on it. #loweredproblems?
Height of Jack vs trok
Most of it bended back, just tiny hole
And little misshapen
Fuk
Fuk
Next I'll try to install console :scared:
There's a short fat one for front, and long skinny for rear.
How rear should be
Didn't pay attention and mixed the driver side up.. Fuk
The leaking tire wasn't a simple plug like I hoped. Shits leaking through the bead slowly. Fuk.
Rotated, set back down, tightened, finished up, realized I didn't rotate the pass side. Fuk. Oh well gotta take leaker off anyway and dismount sometime. Fuk.
Also, when lowering driver side front I slid the stand out, lowered jack to hear a CHRRRunch. Mfer. Didn't pull jack far enough out and the truck landed on it. #loweredproblems?
Height of Jack vs trok
Most of it bended back, just tiny hole
And little misshapen
Fuk
Fuk
Next I'll try to install console :scared:
I came in here with the expectations that SOMETHING, somehow went wrong.
10/10 was not disappointed.
10/10 was not disappointed.
I think you should just pay people to do stuff to your truck. Less chance of vehicle fire.
Sent from the 4.hate using tapaturd
Sent from the 4.hate using tapaturd
How many times have I said to send that thing to me before you destroy it..
Sent from my SM-G900T using Tapatalk
Sent from my SM-G900T using Tapatalk