official aSSmeister build
- Thread starter Bassmaster
- Start date
Word. Having trouble finding the stop tech calipers others got but without the red powder coating
Sent from my Galaxy S-Fawhore
Sent from my Galaxy S-Fawhore
yea get slotted, drilled doesnt do anything IMO
you dont need calipers, just get some good pads and rotors, its not like your stopping 38" super swampers.
you dont need calipers, just get some good pads and rotors, its not like your stopping 38" super swampers.
i bought one for the nbs, never installed it, dont plan on installing it anymore either. the tune acheived the same thing
Mine made a fuego stopping from over 120 brb numbers don't go that far down assuming Mach 7
Sent in limp mode.
Lmao meant to edit not quote
kay:
most people dont, but if you build up brake dust, the drilled parts can cause cracking because the heat has no where to excape when its being pushed by a pad, and the pressure and heat can cause a crack to happen. slotted atleast one end of the slot is open to atmosphere so no pressure can build.
i need breaks pretty soon. while i have it apart, i like to do it all at once :dealwithit:
i'll be going with the EBC greenstuff pads as it seems thats the popular set to go with
i hate when people have that on craigslist.
some times i just send an email "its got new breaks eh"
Some pics this week
Windshield will be replaced within a week. Will probably do 50 shield with 5 strip. Then work on finally getting the fog lights in
Windshield will be replaced within a week. Will probably do 50 shield with 5 strip. Then work on finally getting the fog lights in
35 at least I want 20 now that I have 35Some pics this week
Windshield will be replaced within a week. Will probably do 50 shield with 5 strip. Then work on finally getting the fog lights in
Bassmaster luck. Drove to work, to find out that I couldn't work, so I came home to do some shit. Tried to fish my switch out from behind the bezel, no luck, can't see it.
Did manage to tighten my loose door handle nut so that will stfu & stop rattling.
Then decided to pop the door marker lights out to paint the red to black. The can reads not to use below 60, but it's almost 70 out so I thought I'd be alright for that little piece. Cleaned, taped, cleaned, sprayed the adhesion promoter. After 2 mins it dried up all cracked. I now realize it was cooler from being in the garage..
So I quick sanded it down some and shot black for the hell of it. No good.
Sanded that back off and fuck it. The cans and in my room now to warm up and I'll try again this weekend. Till this, this dull smoke shit.
Sent from my Galaxy S-Fawhore
Geez that turned out to be an annoying process for such a little mod. I never mentioned painting that on forums cause I totally thought I'd get ripped a new ass lol nice to see people actually paint that thing
