NBS 99 07 interior thread

[Andrew.]

Thanks for the info. So I need a new glove box also?


Sent from my iPhone

no necessarily. if you have a dremel or cut off wheel, you can cut yours to fit. i think itdropt did a write up on here the first time around until he fell off the face of the earth....you cut the section just after the pullout ash tray and stuff.

 

[BOO5TED]

James did it on his, look good too.

 

[James]

Thanks boss.

didnt take long, and i didnt read any writeups.. only grabbed a couple of pictures though

 

[Andrew.]

that'd be it there.

your interior seems to have the same problem as mine, the 2 tone camera flash dealy. My console/glove box/drivers kick dont match my bezel or upper dash with camera flash, but IRL they are identical. :shrug:

 

[cknox121]

Cool. Sounds pretty straight forward. Now to find a mf console


Sent from my iPhone

 

[bgray]

The colors are different. In person they look the same, but the interior dye color is different

 

[Peyton676]

I have every single thing out the truck,except i dont know how to get the lumbar knob off

 

[BOO5TED]

IIRC there is a set screw in the one on my Silvy, remove the screw pull on the knob.

 

[Peyton676]

Thanks ill try it
Priming everything saturday except the door panels
Wont start on the 4 panels until im satisfyed how everything comes out before paint

 

[Peyton676]

For you guys stripping the paint off the dash, acetone just eats ot right off

 

[Khaos]

For you guys stripping the paint off the dash, acetone just eats ot right off

Good to know! I'll be doing this soon. How's the interior coming along?

 

[Peyton676]

Everything is ready for primer tomorow
Well not the door panels, i got so much shit once i started splitting everythibg and stuff i got close to 70 pcs

 

[BOO5TED]

Just checked on a coworkers truck, no set screw its a clip that holds it in. Push the panel in some and you will see it. Pull the pin out with a hook or pick tool and the knob will slide off.

 

[Peyton676]

Thanks tony

 

[BOO5TED]

No problemo, should get thos spikes out today too.

 

[Peyton676]

Ok cool
Also im pulling the over lay out of my cluster and painting it the peice thats raised up around all the gauges

 

[Peyton676]

'02 im hoping it comes out i know sams '05 does

 

[juanr_08]

damn Peyton now you got me to paint my shit lol..might start taking shit off tomorrow too lol...only dash piece, glove compartment area and center cosole....does that airbag cover come off too?

 

[Peyton676]

I pulled the whole bag
4 10 mm bolts
Becareful with the big dash peices they break really easy
Ask me how i know

 

[BOO5TED]

Peyton, want an escalade cluster for your truck?