Dat Tyler NBS 2.0 and all my other shit

DirtyBlackHoe said:
Tyler...what is the exact setup? I know borla pro XS but what muffler and how do you like it? I am looking at something exhaust wise for my 2004 Tahoe and that sounds great!
Click to expand...
Stock tailpipe on burbs is a true 3” pipe so just hacked the stock muffler off, extended the factory intermediate pipe with 3” got rid of the goofy y pipe after the stock muffler so it was just a single 3” all the way out with a short 4” double wall tip. Muffler is just the single 3” center in offset 3” out, believe it’s a 14” case

Theres 2 different part numbers on summit for what appear to be the same thing Ik not sure what the difference is but they the material, dimensions and specs for the inlet and outlet
https://www.summitracing.com/parts/bor-400482
 
Last edited:
Tylers88 said:
Stock tailpipe on burbs is a true 3” pipe so just hacked the stock muffler off, extended the factory intermediate pipe with 3” got rid of the goofy y pipe after the stock muffler so it was just a single 3” all the way out with a short 4” double wall tip. Muffler is just the single 3” center in offset 3” out, believe it’s a 14” case
Click to expand...
Very awesome. No drone? No negatives?
 
DirtyBlackHoe said:
Very awesome. No drone? No negatives?
Click to expand...
Some drone at interstate speeds, not bad in the front but in the 3rd row it sucks, there’s probably enough room where the factory muffler was to add a bullet to cut down drone. It could also be because I run 295s so it always working pretty hard above 75 or so.
 
Tylers88 said:
Some drone at interstate speeds, not bad in the front but in the 3rd row it sucks, there’s probably enough room where the factory muffler was to add a bullet to cut down drone. It could also be because I run 295s so it always working pretty hard above 75 or so.
Click to expand...
Makes perfect sense... drone was main concern, but the Tahoe doesn't have third row so might be ok.

Thank you for the help and information.

Sent from my Pixel 2 XL using Tapatalk
 
DirtyBlackHoe said:
Makes perfect sense... drone was main concern, but the Tahoe doesn't have third row so might be ok.

Thank you for the help and information.

Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Not a problem, I’ve always wondered if the drone in the 3rd row had something to do with sitting behind the muffler and having the exhaust come out basically right outside the window
 
  • Like
Reactions: DirtyBlackHoe
Had to replace the rear brakes on the Burb, long story short Powerstop rotors are decent but pads suck. Also got bored today and sawzalled the back muffler off the Audi because fuck it why not
 
  • Like
Reactions: Huck
38E32E83-72AA-48D3-9C8E-9D6818BF0BC1.webp
The guys that have me on snap know but I fucked up a couple weeks ago and assholed some shitbox Mitsubishi suv thing. Dropped car off at body shop today but making the best of the situation. Front end was all chipped up so it needed a repaint anyway.

Going to put an RS grille and tow hook plate mount on it while it’s apart like this
44AC9EDF-3AA1-479B-AD0D-1DEB5D1CBAF3.webp

Honeycomb insert on rear bumper is lose and rear valance is kind of fucked anyway too so kicking around putting one of these ESC diffusers on it.
90AA58CB-B73A-40AE-88D8-4A99A3C2F028.webp
 
  • Like
Reactions: mike., racer36, Huck and 1 other person
3A666BCE-A713-49F1-A8D1-2621B632574E by Tyler Reiter, on Flickr
Way back in like January/February I bought my sisters Camry(Edith) from her for $1000 to use for a work car, heat is hot and AC is super cold but wife took over it when I was working out of state but I’ve reclaimed it since I wrecked the Audi and haven’t been able to drive it. Did new front tires and struts all the way around this summer. Well today I finally addressed the headlights, no before pictures but they looked just as bad as ever other one of the 1,000,000 Camrys just like it out.

F4C4EB3C-DA65-4FDD-A616-7F159AA9C82F by Tyler Reiter, on Flickr
Pretty happy with how the lights turned out for spending way less than 10 minutes on them

Also update on why exactly zero fucks about the Burb that has been renamed The Turd
A0BA75FF-D206-43A6-846F-F3E377007FB7 by Tyler Reiter, on Flickr
 
Last edited:
Huck said:
The burb made me cringe


Sent from my iPhone using Tapatalk Pro
Click to expand...
Yea it’s pretty bad, damn thing still runs great though so I’m really torn between just saying fuck it buying a welder and doing the work but also it’s pretty great having something I literally do not care if I drive it through a fence
 
Tylers88 said:
Yea it’s pretty bad, damn thing still runs great though so I’m really torn between just saying fuck it buying a welder and doing the work but also it’s pretty great having something I literally do not care if I drive it through a fence
Click to expand...

Having a vehicle that I give zero fucks about has been LIBERATING lmao.
 
  • Like
Reactions: Tylers88
Huck said:
I’m slowly inching toward that with the white truck


Sent from my iPhone using Tapatalk Pro
Click to expand...
Your white truck is still super clean and nice though.

I accidentally put my foot through the rocker of my Yukon while I was strapping a box to the roof rack 2 nights ago :rofl:
 
Oktain said:
Your white truck is still super clean and nice though.

I accidentally put my foot through the rocker of my Yukon while I was strapping a box to the roof rack 2 nights ago :rofl:
Click to expand...

I laughed so hard at that


Sent from my iPhone using Tapatalk Pro
 
Oktain said:
Your white truck is still super clean and nice though.

I accidentally put my foot through the rocker of my Yukon while I was strapping a box to the roof rack 2 nights ago :rofl:
Click to expand...

Also, may be fairly clean and nice buttttt....it does this
17fc8f750fd017521b68bea4c70f8813.jpg



Sent from my iPhone using Tapatalk Pro
 
Huck said:
Spin a filter on every 5000. Fuckin mint


Sent from my iPhone using Tapatalk Pro
Click to expand...
It runs great still but has a 2 strokeish blue cloud when I start it so I’m pretty sure it’s just valve seals so really I should just stop fucking around and do them, what I’ve spent in oil I could have probably rebuilt the damn thing from valve cover to oil pan :lol:
 
You must log in or register to reply here.
Top Bottom