05 CCSB slow build

[Tylers88]

Needs more methods and MTs again

 

[2005_Silverado]

:byefelicia:

 

[GR$$N$]

Fina make xmember outta pencils and elmers glue imo

 

[HackMcMaster]

Fina make xmember outta pencils and elmers glue imo

Should tub his front end while your at it that way can do mine next

 

[Khaos]

Goes to mexi
Takes pic out of window of beautiful scenery
Can't even get sex pic of troka with beautiful scenery as backdrop



:mexiokay:

 

[Dakota]

Goes to mexi
Takes pic out of window of beautiful scenery
Can't even get sex pic of troka with beautiful scenery as backdrop



:mexiokay:

IMFO

Sent from my SM-N900V using Tapatalk

 

[2005_Silverado]

:mexiokay:

ill get some next time. its the main/only road into town...cant go crazy blocking it. I was actually on a bridge right there :rofl:

 

[Khaos]

Lol nice. Looks like a nice area scenery wise.

 

[2005_Silverado]

putting this here for future ref

http://www.belltech.com/extras/docs/BBGC/4951.pdf

When I swapped spindles, my alignment went all to fuck...already has offset bushings in there but I guess that's not enough to get it at middle of the road specs since its maxed out and borderline atm.

 

[BOO5TED]

When you did the flip kit did you remove the bolt out of the driver side leaf spring in the front?

 

[2005_Silverado]

No sir.....we just dropped the rear and slid the axle over the springs...fuck that bolt. LOL

 

[BOO5TED]

That's kinda what I though. :shake:

 

[SamCarroll]

No sir.....we just dropped the rear and slid the axle over the springs...fuck that bolt. LOL

thats what i did for NNBS too. twice.

 

[CammedVmax]

Also what I did, super easy that way.


Sent from Tapashit

 

[Jared]

No sir.....we just dropped the rear and slid the axle over the springs...fuck that bolt. LOL

Yup, same here

 

[BOO5TED]

mg:

Thanks

 

[2005_Silverado]

btw, no need to drop the hitch either when u wanna remove shackles....lower n raise the truck from the hitch so u can remove/install the bolt from above the frame...once bolt is in...u can bolt the shackle to the hanger and ur done.

 

[BOO5TED]

I knew that already. :shake:

 

[Ginger]

i removed that bolt, but i swapped leaf springs out.

 

[2005_Silverado]

so ive been buying parts here n there to make me a bracket to mount my air chuck and switch. will bolt angle iron to xmemer, some square tube, then angle iron to bolt up some diamond plate. Air chuck will be activated with a switch that will open and close the air valve. Ive seen too many air chucks leak...dnw it plumbed directly to the tank, hence the e-valve. All this will be hidden behind the lic plate which will flip up with simple hinges. Plate is done, just gotta start cutting some metal epper: