Your vehicles as they sit now!

1C95510E-D2A6-4A67-9FA2-DD448568B479_zps2dxbkzvw.jpg
 
static06 said:
How difficult and costly is it? Would like projectors one day.


Sent from dat iPhone 6+ using Tapatalk
Click to expand...


It's not that bad, if you can clear a set of headlights you can do it.

This kit is $270 and everything you need minus a tube of silicone and/or jb weld.

Bi-xenon Morimoto Mini Stage III Kit (H1)


You can get even cheaper if you just get the projectors from TRS and the bulbs/ballast from DDM or similar. It can also get more expensive if you get better projectors or OEM ballasts/bulbs, all depends on what you have to spend and what you want the final output to be.
 
WildChevys said:
a33409256b2bfd22963d3e677da9b652.jpg

Pulled the valance in about 30 minutes using a grinder. Only shit left to do is get the tailgate handle painted and get his 20" rigid installed in the split in the bumper


Sent from your sister's house
Click to expand...

Wait when did you get this?
 
BOO5TED said:
It's not that bad, if you can clear a set of headlights you can do it.

This kit is $270 and everything you need minus a tube of silicone and/or jb weld.

Bi-xenon Morimoto Mini Stage III Kit (H1)


You can get even cheaper if you just get the projectors from TRS and the bulbs/ballast from DDM or similar. It can also get more expensive if you get better projectors or OEM ballasts/bulbs, all depends on what you have to spend and what you want the final output to be.
Click to expand...

Say I already have clears, would I have to open them back up?
 
Found my old beater on craigslist. Guy sold it a week ago and doesnt have any contact info for the new owners. I had more fun driving this turd than I do my nnbs. Lol. 5.7 5spd 4x4
27febe44d549d467eaa6daddad009182.jpg
 
You must log in or register to reply here.
Top Bottom