Static NNBS (GMT-900 07-13)

Some help in want to drop my truck 4/7 when I bought the truck came like this it looks level and I trying to find out that can I do to make 7 drop I looked if had a shackle but I thing they remove a leaf spring
 
Flip kit will get you 7 in rear
9e4b494f4c3a93b276339bf8aa53f620.jpg
 
Flip kit will get you 7 in rear
9e4b494f4c3a93b276339bf8aa53f620.jpg
But I will be more lower because of the leaf spring remove? I don't know if I measure right the back tire to fender is 37in and the front measures 36 1/2

Sent from my SM-N920T using Tapatalk
 
Count your leaf springs, these trucks should have 3 total. Also, take a picture of the shackle and see if there is a block between the spring pack and the axle.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
Count your leaf springs, these trucks should have 3 total. Also, take a picture of the shackle and see if there is a block between the spring pack and the axle.

Sent from my SAMSUNG-SM-N920A using Tapatalk
It has only 2
15d1d05df28e9e43648193aa0f02e206.jpg



Sent from my SM-N920T using Tapatalk
 
Last edited:
Is Mcgaughys 34070 kit a good kit? I will ask few friends is they want to trade my leaf spring for theirs

Sent from my SM-N920T using Tapatalk
 
Helped my brother in law out today. Lowered their Yukon. It's a 2/4 drop using beltech struts up front and beltech springs in the rear. Also debadged it (needs demolded too, but we ran out of time).. Tires are 295/35/24. Had to do a good amount of trimming on the liner in front of the rear wheel. Other than that it turned out good!



B8FB635A-C27E-4035-BCDA-988567E12EE3.jpg

6960722B-F838-4D0B-878C-5DA5BACA88E1.jpg
 
Helped my brother in law out today. Lowered their Yukon. It's a 2/4 drop using beltech struts up front and beltech springs in the rear. Also debadged it (needs demolded too, but we ran out of time).. Tires are 295/35/24. Had to do a good amount of trimming on the liner in front of the rear wheel. Other than that it turned out good!



B8FB635A-C27E-4035-BCDA-988567E12EE3.jpg

6960722B-F838-4D0B-878C-5DA5BACA88E1.jpg

Oh my god that's perfect


Sent from my iPhone using Tapatalk
 
It's relatively tight above the tires like it sits.
It rubs a little on the front liners if the wheels are turned in reverse.
The rear rubbed constantly so I trimmed a good bit of the plastic liner back there.
Could probably go another inch no big deal, just have to trim a little more. The front can be heated up and pushed out of the way I'm sure, and be just fine. I told him to try that and see if it fixes the rub