Static NNBS (GMT-900 07-13)

Static NNBS (07-up)

Whoops. Was just uploading pics I ran across saved on my phone, thought it was just super static :crazy:
 
Static NNBS (07-up)

The McG kit part number you need is 34043 doyouquaxu.

Edit: nevermind, saw you need one for a truck without a flip.

Thanks. I had a bookmark to gmfs with apart # in a thread, didn't write it down and now gmfs is gone. fuggit
 
mine is suppose to be like a 4 1/2 drop up front but i measured mine its 16" and its not even sitting as low as is normally does cuz it still hasnt settled from being jacked up at the alignment shop today

Hmmmm, maybe your lower than what you thought or I'm higher than what I thought. I've got Mcg 2" spindles and Mcg 2" coils (which I never thought actually dropped my truck the full 2") so it's possible I may not be quite 4" in the front. I've also got the belltech adjustable struts, but have them set to factory height.
 
Static NNBS (07-up)

My CCSB on 245/70/17 measures 36.25" in front 38.25" in back 100% stock. From ground to bottom of fender in the center
 
i was hungover, didn't have my breakfast redbull and cigarette yet.

22.25" front, 24.25" rear, center of hub to center of fender.

Also for anyone else, Airlift Slamair part # 59209 is the bag set up i mentioned in an earlier post last page. Was gonna do those bags, onboard air, and a TSS 4/6 kit and belltech street performance shocks front and rear
http://thesuspensionsource.mybigcommerce.com/07-11-silverado-sierra-4-7-lowering-kit/
http://shop.airliftcompany.com/prod...r;_Adjustable_Air_Springs;_For_Lowered_Trucks
http://shop.airliftcompany.com/product/0/25870/_/WirelessONE_Control_System
 
i was hungover, didn't have my breakfast redbull and cigarette yet.

22.25" front, 24.25" rear, center of hub to center of fender.
[/url]

dang so that means im dropped 6" in the front
i hope this is true so i can get the spindles and fix my alignment
 
Last edited:
680308_443609539028738_1740070493_o.jpg

Definatly low but it looks like the tires are real small too making it sit lower.. Sick looking tho i like the stance
 
Ya thats what it should be but I was going off measurment wise. What does yours measure out to?