NNBS Intake with extras
- Thread starter Gannon
- Start date
I believe he is talking about this
Sent from my iPhone using Tapatalk
Well yeah, but I don't get the ripping it off part lol. Like you don't need it on the new one? Cause I used it on the new one :shrug: lol I made it all fit together
Sent from Tapashit
I was told you could tune that stuff out and just do away with it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
You can tune it out. According to ShredSled it causes the exhaust to smell even more plus the smell from no cats.
I don't. I used the nnbs evap stuff and took the Nbs hose that was too long, cut a section out so it was the right length, then stuck the little fitting I took off the other end and it pops right on the evap solenoid lol. I had it hose clamped at first but it kept throwing an evap leak code
No more thread jacking lol
Sent from Tapashit
Today's technology is killing it for me, stayed neck to neck with a 2013 stock 5.3 sc from about a 30 roll. :nono: feels like a waste of money dumping all that money into an old ass motor. If anything else gets done motor wise it would be boost or spray.
Don't think, just do. :up:
Sent from my iPhone using Tapatalk
look on ebay. stock ls1 heads are cheap but they will not be in improvement over you stock heads cause you will lose compression. 243's are pretty much the only option for 4.8/5.3 unless you are FI with 317's
Last edited:
Look for some 799s off an L33. Or if you get a good deal on 317s, you could mill them.