Lifted nbs thread

I'll play along


9303F76B-64C3-49F8-BC93-60629FECBC0E.jpg

100394C2-0747-442B-9118-273AAEFA8214.jpg

3dab96dc-ec41-4706-a3eb-27b85d7b61b6.jpg

87128641-16F9-4182-89FD-82E3EC88EBB0.jpg
 
Ginger said:
atleast now i know i wont look retarded on 33's with a lift.
Click to expand...


33s are perfect on a NBS as long as you don't get too crazy with the lift height IMO. The fender wells are small enough, that as long as you have enough wide it looks fine.
My truck sits pretty close to 11 inches of lift. I'm happy with the wheel/tire/spacer setup under it. If you get up on Benge's level, 35s work out better.
 
Fiesty said:
Could u fit 35s? If I was to lift, it would be on 22x12s and 35s.. I'd have same lift as u but 1.5" bl
Click to expand...

If I put 22x14s on it with 35s, I would have to trim a lot off of the bumper. With the 1500 front end it wouldn't be as bad, but since it sits 1.5' lower with the 2500HD front end it leaves less clearance.
If I wanted to run 35s, I would probably go with 9.5 FTS lift IMO.

It's all debatable though man... There's plenty of people out there running 22x14s and 35s or 37s with 6+3.
My theory has always been; just because you can, doesn't mean you should..
 
Last edited:
BB said:
If I put 22x14s on it with 35s, I would have to trim a lot off of the bumper. With the 1500 front end it wouldn't be as bad, but since it sits 1.5' lower with the 2500HD front end it leaves less clearance.
If I wanted to run 35s, I would probably go with 9.5 FTS lift IMO.

It's all debatable though man... There's plenty of people out there running 22x14s and 35s or 37s with 6+3.
My theory has always been; just because you can, doesn't mean you should..
Click to expand...

I said 22x12s foo
 
You must log in or register to reply here.
Top Bottom