L59 to L33 swap...

[Peyton676]

Long tubes will be had ASAP. Info have the option of running LS6 manifolds as the guy helping with the install has the stock ones from the Z06. Might do that but def looking to get long tubes in the very near future, wish I could do em now lol

Dnw ls6 intake

Sent from my SAMSUNG-SGH-I777 using Tapatalk

 

[07sierraclassic]

No, ls6 exhaust manifolds.

 

[J_Corr]

it's quite a bit of reading but some good info in these links. All the part #'s you'll ever need as well.

http://www.lsxtv.com/tech-stories/engine/junkyard-ls-engine-builds-going-from-rags-to-riches/

This is a little right up about a 8 sec 4.8L datsun with stock bottom end and is a DD:

http://www.lsxtv.com/features/car-features/video-stock-4-8l-short-block-pushes-71-datsun-into-the-8s/

 

[07sierraclassic]

Lotta good info in there. So once this thing is up and going, LS6 heads and a decent cam should really be enough to get me where I'd want to go. Eventually I think 400rwhp would be sweet, doesn't sound like that's too hard to achieve with these engines.

 

[J_Corr]

nope from what I have been reading pretty simply done and on a decent budget.

 

[bgray]

400hp is not a hard task

 

[Peyton676]

400hp is not a hard task

I second that.
Im only looking at 420-430 out of mine
You wont do 400rwhp with bare ls6heads and cam,and some kind on manifoilds your talking about.

Sent from my SAMSUNG-SGH-I777 using Tapatalk

 

[07sierraclassic]

Stock lq4 on a tune will make me happeh enough for now. I'm just dreaming out loud right now lol

 

[07sierraclassic]

Swap is going down this weekend as this last weekend was my 21st. Lol I will try an do a write up as best I can. Merica!