ITGuy's 1972 Chevrolet Custom 350 C10 - Shop Truck / Noise Maker

no methods on that please...

cheap good looking 5x5 rims = Boss 338 they come in 18 and 20"

boss_338_chrome_500.jpg


boss_338_gray_500.jpg


boss_338_black_500.jpg


jd-wheels-18x8-20x8-5-boss-338-black-wheel-velozza-zxv-tire-package-americanlisted_31276245.jpg


DSCN1273.jpg


216_V200912221559542.jpg


DSCN2284.jpg
 
Did a little reading in between projects tonight. Found a few lowered C10's.

My rim & tire setup will most likely be
Front - 20x8.5 with 5.25 BS [+14mm], maybe some 275/40 tires
Rear - 20x10 with 5.5 BS [+2mm], maybe 295/40 or a 305/35 tires for the rears for a good fit to that wider rim.

I'll do a little more research, but thanks! This ol' beater will look good with some new shoes.
 
Last edited:
this thing will look great in no time!!! nice winter beater too while the LBZ is in the shop. unless you need to actually go places when there is snow on the ground
 
this thing will look great in no time!!! nice winter beater too while the LBZ is in the shop. unless you need to actually go places when there is snow on the ground

Not sure if I will run in winters.. my immediate need is when I lift the LBZ and paint that frame.
It's really for fun at the moment. Thanx man

Nice choice

Almost got the Coys that Jordan posted. Didn't want to go to 22's though.

These are still small tires though.. not sure how it will look.
Front will only be about an .6 larger overall Dia
Rear will be about 2.4 inches larger Dia

I might need to make some adjustments to how it sits. I don't want too much rake.
 
Last edited: