Cornell's 2007 GMC Derpamax Build Thread

Cornell: where did you end up buying HIDs from? I'm lookin for a new source now since V-hids stopped carrying theirs
 
Place on ebay. Usautopart4u... Giving them a shot. Got 4 kits for 130 bucks

Xentecs? Mine work pretty well. Little slow warming up, but they worked fine, plug right into factory harnesses. we'll see how long they last, but the lows have ahd xentecs in there for a year at least and no issues
 
Got them all installed yesterday. Stock gmc lights throw light so bad. I want denalis with tsx projectors
 
I know you hate demodding your other truck, but why don't you take the denali's off it, since it is in the name of safety for yourself and other drivers :cheeky:
 
quick question, are switch backs plug n play, or do u have to splice some shit together for a 2006 silverado?
 
Last edited:
im with this guy, but ONLY because the safety of fellow people on the road..safety is the key here Matt..

Yeah i know. I took the bulbs out and out the stock ones back in

quick question, are switch backs plug n play, or do u have to splice some shit together for a 2006 silverado?
Plug and play. You have to wire in 3 wire 3157 sockets if you wanna convert your drls
 
Plug and play, you will need to do the flasher mod or get load resistors so you don't get hyperflashing.
 
Honestly the denial's were not all that i thought they would be. Even with those foreground limiters (the non stepped shield) there is a ton of light right infront of the truck as gets less intense as you progress further out to the cutoff. But the color is nice and the cutoff is tits but the old reflector lights put a lot more on the road
 
Flasher mod probably, since you steady have the board. You would have to go buy the resistors and IIRC they are like $20 a piece.

My switchbacks cost me 24$ for the pair... The mod will cost more then the actual bulbs lol. Where's the thread on how to do this? I really don't feel like splicing wires n shit though.. It's been a while since I did that.


Sent from my iPhone using Tapatalk
 
Gimme a sec and I'll find it, wasn't here it was elsewhere on da intanets.


**edit**

Here is the flasher.

DSC03241.jpg



Pull the cover off of it like so.

DSC03245.jpg



Pin #7 you need to clip the contact. Facing you, it's the on the top second from the left.

Image001copy.jpg
 
Gimme a sec and I'll find it, wasn't here it was elsewhere on da intanets.


**edit**

Here is the flasher.

DSC03241.jpg



Pull the cover off of it like so.

DSC03245.jpg



Pin #7 you need to clip the contact. Facing you, it's the on the top second from the left.

Image001copy.jpg

this is on the switch back?

edit: the first pic didnt show till after i posted. gotcha
 
4257485b-b466-4ed2.jpg



4257485b-b49d-c5ae.jpg


Productive day.. got a white HD hood for 150 with no dents. Picked up 2 8 inch stacks for 140 bucks too