My 10 & 12ks work bitchin dunno what u talking about
Sent from a secure terminal using the classified military network
Sent from a secure terminal using the classified military network
Choosing HIDS
- Thread starter Andrew.
- Start date
Post a picture of your tinted lights... There comes a point where no amount of light will counteract tint. How are they tinted?
Sent from my igloo using my SGS4 eh.
The Inside of the assembly are black the lens is clear it won't let me post a picture so I'll send a link of them http://www.amazon.com/gp/aw/d/B00CPI3E1C/ref=mp_s_a_1_2?qid=1385389298&sr=8-2&pi=SY200
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Didn't think my Tapacrap pics came out that small... must be the phone.
Either way, Yeah 35W HID will help, but best scenario is a full retrofit. With tinted projector shrouds I think those lights would actually be pretty sweet looking.
EDIT:
Before the expected "What's a retrofit?" question...
Do that ^^^^
With these parts vvvvv
http://www.theretrofitsource.com/product_info.php?products_id=227
Select your colour temperature (please don't go any bluer than 6000k or your light ouptut becomes terrible)
Select shroud style, I think the graphite shrouds will match your housings the best.
You may want some re-sealing glue.
Harness you need is the 9006 one.
You'll also have to order high beam splitters to control your bi-xenon function.
http://www.theretrofitsource.com/product_info.php?products_id=9717
These are the graphite shrouds:
http://www.theretrofitsource.com/product_info.php?products_id=5010
You'll also need to do the hi-4 mod. We should have a write up in the how-to section.
Oh, this will be your light output after:
Any questions, you know where to find us :crazy:
Either way, Yeah 35W HID will help, but best scenario is a full retrofit. With tinted projector shrouds I think those lights would actually be pretty sweet looking.
EDIT:
Before the expected "What's a retrofit?" question...
Do that ^^^^
With these parts vvvvv
http://www.theretrofitsource.com/product_info.php?products_id=227
Select your colour temperature (please don't go any bluer than 6000k or your light ouptut becomes terrible)
Select shroud style, I think the graphite shrouds will match your housings the best.
You may want some re-sealing glue.
Harness you need is the 9006 one.
You'll also have to order high beam splitters to control your bi-xenon function.
http://www.theretrofitsource.com/product_info.php?products_id=9717
These are the graphite shrouds:
http://www.theretrofitsource.com/product_info.php?products_id=5010
You'll also need to do the hi-4 mod. We should have a write up in the how-to section.
Oh, this will be your light output after:
Any questions, you know where to find us :crazy:
Last edited by a moderator:
Yes you can. 9006 bulbs. Your output will be typical of plug n play hids all spotty and full of glare. Don't go any higher than 6000k as you'll have too much blue, look ricey and have no usable output.
Sent from my igloo using my SGS4 eh.
Sent from my igloo using my SGS4 eh.
Pnp in stock gmc housing really aren't that bad compared to most other cars. Especially if you have 4300k