Bagged NBS Thread (99-07c) Pics & Discussion 123123

Some will, you should consult and verify with yours

Geico and Nationwide make you claim it on your policy before they will cover a dime (minus common things like radios and steps n stuff). It also jacks up your premium, and im sure you need hella receipts - havent added anything to my policy yet, but ive gotten quotes and it aint pretty.
 
at the end of the day, that light isn't protecting anything, and if he does not have it listed, and is screwed by the driver he will have to eat the cost. I personally know several people who have been hit by illegals and screwed.

I personally would try to get my shit like that noted with a good insurance company, we went through this with Peyton. Some agents and companies are better than others when it comes to this.

Just cover your ass, or know you will have to possibly pay out of pocket
 
Okay, we will just see how this goes. From what i read, i can post pictures....

Here are some install pictures of one of our kits:


775863_537203946304159_270297045_o.jpg

317030_537203976304156_1647977438_n.jpg

775857_537204179637469_1622201421_o.jpg

740122_537204209637466_722109454_o.jpg

428285_537204029637484_1974402357_n.jpg

603049_537204136304140_640255005_n.jpg

45898_537204052970815_1637332827_n.jpg

408512_537204189637468_1788110901_n.jpg

74901_537204006304153_505859067_n.jpg



Put together, aligned, and ready to drive. He still needs to make a tranny x-member:
424115_537204062970814_1155246338_n.jpg
 
Its an off brand spindle, im not sure what it is, but he just switched back to stock spindles like i recomended originally, and its back to normal.
 
I do not know for certain what order he sent those pictures in to be honest. Judging just by the picture, i would say yes, but i could be wrong.

He had his truck lowered, with drop spindles, and didnt have stock at the time of the install so he reverse reamed the drop spindles. Then after he got it back together, he wanted to swap new wheels onto it, and i told him it would be best to use stock spindles for what he wanted. I will see if i can get an updated picture with it as it sits now on the 26s.


Taylor
 
I do not know for certain what order he sent those pictures in to be honest. Judging just by the picture, i would say yes, but i could be wrong.

He had his truck lowered, with drop spindles, and didnt have stock at the time of the install so he reverse reamed the drop spindles. Then after he got it back together, he wanted to swap new wheels onto it, and i told him it would be best to use stock spindles for what he wanted. I will see if i can get an updated picture with it as it sits now on the 26s.


Taylor

It almost has to be with the wheels being that close to the fender.

they look like 2wd lift spindles to be honest. with the hub being that far from the upper ball joint
http://www.bing.com/images/search?q...F4584455716C3041BF797596DDAE&selectedIndex=22
 
Yea, they kind of do look like that. Im nearly positive that picture of it layed out is with the old spindles, because those are his old wheels as well.
 
Yea, they kind of do look like that. Im nearly positive that picture of it layed out is with the old spindles, because those are his old wheels as well.

it almost has to be. All this shit lately makes me want to bodydrop a truck
 
were doing a crew cab right now, surprisingly out of all the trucks we have stock floored, these are very easy in comparison.




Taylor
 
were doing a crew cab right now, surprisingly out of all the trucks we have stock floored, these are very easy in comparison.




Taylor

oh yeah. nbs is one of the easiest newer trucks there are to bodydrop. its been almost 5 years since i did the s-10. not doing mine because i'm not redoing it all.
 
Re: Bagged NBS Thread (99-07c) Pics & Discussion

You need to spend less time in here and finish your truck lol

Sent from my DROID RAZR M using Tapatalk 2
 
I'm not doing it to my truck. After the intros it's done. I'll just do maintenance and whatever needs to be done to it