Or 3" depending on what hole you put the bolt in on the shackle. Normally just 2" shackles on a stock 2wd the rear will still be 1" or so higher than the front. If you remove your blocks the rest of your truck will be the exact same as a 2wd truck. If you want level, just remove the block, if you want a bit of cali, put the shackles on the 1" hole.
Just remember you could always crank or decrank the front to fine tune it.
Also, stock 2wd shocks will work just fine with blocks removed and shackles, or one of either.
Just remember you could always crank or decrank the front to fine tune it.
Also, stock 2wd shocks will work just fine with blocks removed and shackles, or one of either.
Last edited: