07C bagged ccsb build

27bb43e2872ee9ad8c746649b050aaa0.jpg

49fc34762697f427a7bc8e0cef03831b.jpg

629919f387ec254164b46cd3bf76e937.jpg

7acddaa70b20e1b7f948da1ff2c713e3.jpg



Sent from my iPhone using Tapatalk
 
Bad ass brett. I'd assume bag location was based on towing?

Mostly. He has a 16ft enclosed trailer that he hauls dirtbikes and racing equipment in. He still wants to be able to tow that with this truck.
 
I want a ccsb so much... How much does something like this run from you sir? From stock to this point here?
 
I want a ccsb so much... How much does something like this run from you sir? From stock to this point here?

With everything used on this build, it will be in the $9300-$9500 range. Still have the Exhaust and Bedfloor to be done. Upgrade switchspeed to elevel would be an additional $700 so that puts you into the $10,000 range for parts and labor
Unparalleled Customs front Kit
Nfamus 3 link
Accuair Switchspeed and VU-4
8.5 Gallon aluminum Airtank
York 210 EDC
Hydroboost conversion
Relay and Computer Relocation into Cab
Blower Box Mod
Custom Y-Pipe & exhaust
2 Piece Driveshaft
Narrowed Axle
Front Tubs and Firewall Tubs
Raised rear Bed Floor with tubs

Granted you can make changes to different parts used the parts used or if I'm redoing a truck, the money changes. But pulling a truck in stock and and pulling it out like this with pretty much all the things that you don't have to buy like EDC, 2pc driveshaft, Hydroboost, blower box mod, wire tuck and electrical relocation, and custom y-pipe will put you up there in price.

the SS I did came factory with a 2pc Driveshaft, he went with 2 Viair 480c's instead of EDC, no Blower Box mod, No relocation electrical into the cab, no hydroboost, tucked factory y-pipe. so all that saved him roughly about $1500-$2000. Most of which would be labor.
 
14394621a657c5e8036801755c303280.jpg



Sent from my iPhone using Tapatalk


Say, I'm wrapping up moving my electronics into the cab and I think I'm going to put my PCM like that.
What did you mount it to under there? I was thinking about making a little metal strap or something to hold it up. Curious to how you did this one.
 
Say, I'm wrapping up moving my electronics into the cab and I think I'm going to put my PCM like that.
What did you mount it to under there? I was thinking about making a little metal strap or something to hold it up. Curious to how you did this one.
It's held in with a piece of 2x2 angle welded to the firewall tub and sits in between the fins on the computer so it can't fall out in the floor. All the wires keep it pressed down into it.
I like the roof racks
My favorite part of the whole build is the hidden hitch that comes through the bumper
2645b5abe69d62ec76775b665d6ccdb3.jpg
 
Cool.. I'm either going to do something like that, or take my console out and put it under there. Should reach..

BTW, you planning on hitting up Slamboree next month in OK?
 
Cool.. I'm either going to do something like that, or take my console out and put it under there. Should reach..

BTW, you planning on hitting up Slamboree next month in OK?

I have it under my center console in my truck. This truck doesn't have a console though
No, it's my twins birthday weekend, so I will not make it out.

Sent from my iPhone using Tapatalk
 
Last edited: