Project ITDROPT
- Thread starter ITDROPT
- Start date
It all depends on what happens with these. I'm thinking of switching to some twisted flow or del rio. In the same size I have now except go with a 26x9 in front.
Here's the fuel cell and adapter rings so I can add the stock evap plug once I cut it out of the stock tank.
Well not much progress has been made but here's the passenger side firewall all sealed and undercoated.
Well, I'll start by saying the wheels are gone. I recently traded the 26" Intro twisted trenz 5 for another NBS ECSB. The truck has a 4 3/4" body drop with a custom frame from the firewall back with mandrel bent rails/wishbone setup/fuel cell all setup for 24s. It's all powdered coated candy blue with a few chrome plated pieces. It is the one that was built by B.H.C (bad habit customs) back in the mid 2000s for those that follow streetsourcemag.com and other forums. So far the plan is to swap over the motor/drivetrain plus my modified ekstensive control arms with uniballs onto the new frame. That should bring you guys somewhat up to date on whats going on. Onto the pics...
Right before the "old" one was loaded
How I got the "new" one.
24s on loan to move the truck around.
The beginning of the tear down
Right before the "old" one was loaded
How I got the "new" one.
24s on loan to move the truck around.
The beginning of the tear down
LOL, I wish it was done. i miss driving a bagged truck. Here's a few more tear down pics.
