nickyreno's Build Thread

I have been having trouble finding a hitch receiver for it but a 36,000 lb shackle isn't meant to be used on a 2" hitch. Does anyone have any knowledge on who may sell one, or fab one?

I'm looking for something like this:

bulldog_winch_20186.jpg



This might work, but it's $220 :nono:

bulldog_winch_20181.jpg

20181_2.jpg
 
Here ya go....
bfb9d41cc1c341783409367b2ae005a2.jpg

a4107a22aa80627c240dfa97dce3e5a1.jpg


I had our welder at work (certified) fab me this up out of scraps. It's only a 9.5T but I didn't want to go overboard with it. More than plenty.
975266b38f4033f0db3fc7a056bd08b8.jpg
 
I have these for reverse bulbs -http://retro-solutions.net/product-info.php?3156_3056_3157_3057_3457_4157_T20_5W_CREE_LED_Reverse_Wedge_Bulbs-pid704.html, they are bright. I have 20% tint and i can see just fine backing up at night. I have leds in my dome/map from super bright leds, but they are not bright enough for me. I am looking at getting the ones that alecks posted, they have coupons on their site. 10-20% off, depending on how much you spend.
 
Just fab one up man, mines 2" square tubing with solid half inch chunk welded in. But, i have access to welder and plasma cutter
035d4a2cc09df488d0fa8eb3a2832adc.jpg
 
Just fab one up man, mines 2" square tubing with solid half inch chunk welded in. But, i have access to welder and plasma cutter
035d4a2cc09df488d0fa8eb3a2832adc.jpg
Same as what I used. Used a huge nut welded all the way around. for the shackle pin to go through. Real snug fit so it doesn't have any play other than up and down. Post pics when you get yours done. Would like to see what you come up with.