Leveling kit or body lift

do both then you can run 35" tires and no you still DON'T HAVE to re-gear but it is recommended,

i could see you not wanting to spend the money especially on a 4x4 truck

but do what you want...and what you think looks the best
 
pu6a2yry.jpg
that's a 1.5 body and leveling kit with 33s I think


Sent from my iPhone using Tapatalk
 
then do both OR fist do leveling kit and if you want to go higher then put the body lift on
 
the leveling kit will make the truck look bigger since it will bring the front up 2-3" and the rear 1" the body lift will lift the whole truck body 1.5" or 3" depending on what size kit you get.
 
chris.martin.3701 said:
pu6a2yry.jpg
that's a 1.5 body and leveling kit with 33s I think


Sent from my iPhone using Tapatalk
Click to expand...

That's just a level, you can tell cuz the hitch is still flush with the bottom of the bumper. Just do a level first, it's WAAYYYYY easier to install then a bodylift and looks better IMO. If you still want some more height, then do the BL.
 
chris.martin.3701 said:
So what do y'all think I should do?? I want the look of a body lift but want t level should I just do both at same time ??? & should I run 33s will it be any different ?


Sent from my iPhone using Tapatalk
Click to expand...

Do both. That's what I have. I wouldn't run the 3" blocks in the rc full leveling kit though. I switched back to stock blocks because I didn't like the rake. If I were you I'd crank stock keys, do a zone 1.5", then 33s on a nice wheel. Or 35s on stockers if that's the route you wanna go.

Mine. RC keys, Zone 1.5" body lift. 33/12.50/18 Toyo MT
 
Fiesty said:
Do both. That's what I have. I wouldn't run the 3" blocks in the rc full leveling kit though. I switched back to stock blocks because I didn't like the rake. If I were you I'd crank stock keys, do a zone 1.5", then 33s on a nice wheel. Or 35s on stockers if that's the route you wanna go.

Mine. RC keys, Zone 1.5" body lift. 33/12.50/18 Toyo MT
Click to expand...

I have the 3" block and I still almost have lean
 
Fiesty said:
Do both. That's what I have. I wouldn't run the 3" blocks in the rc full leveling kit though. I switched back to stock blocks because I didn't like the rake. If I were you I'd crank stock keys, do a zone 1.5", then 33s on a nice wheel. Or 35s on stockers if that's the route you wanna go.

Mine. RC keys, Zone 1.5" body lift. 33/12.50/18 Toyo MT
Click to expand...

I have the 3" block and I still almost have lean
 
Fiesty said:
Do both. That's what I have. I wouldn't run the 3" blocks in the rc full leveling kit though. I switched back to stock blocks because I didn't like the rake. If I were you I'd crank stock keys, do a zone 1.5", then 33s on a nice wheel. Or 35s on stockers if that's the route you wanna go.

Mine. RC keys, Zone 1.5" body lift. 33/12.50/18 Toyo MT
Click to expand...
Do you have another picture from the side. ?



Sent from my iPhone using Tapatalk
 
here is how it goes.

get a leveling kit, i got just keys and shocks, sometimes you can just run shock extenders if your trying to be cheap on it. leveling kit and extenders are like 100 bucks

if it still isnt big enough, then put a body lift on.

body lifts are actually really easy, i put mine on myself with the use of a jack and block of wood. only hard thing is the radiator shroud relocator

dont worry about a stabilizer or sleeves, no one for the most part runs a stabilzer on a IFS setup unless its a huge lift. sleeves are more of a diesel or truck pulling thing, if your planning on pulling a sled in 4wd then you shouldnt have a 99 5.3 gas truck anyway.


a body lift will not level a truck, it will just lift it without changing anything else.


no more repeditive questions, you have asked the same thing 4 times
 
You must log in or register to reply here.
Top Bottom