Lets hear your cam????

[Jake747]

Dnw any comp lobes. There's threads on pt.net popping up like wildfire of comp cams wiping out bearings and lifters


Sent from my iPad using Tapatalk

Wonder what oil they're using....

 

[Jared]

Eps or xer or pat g has a new lobe he is using

 

[bayousam]

https://vimeo.com/128038113


Sent from my iPhone using Tapatalk

 

[slicksierra]

Wonder what oil they're using....

Not sure dude but it's enough to scare me.


Sent from my iPad using Tapatalk

 

[slicksierra]

Eps or xer or pat g has a new lobe he is using

Do pat g grind his cams on comp blanks?


Sent from my iPad using Tapatalk

 

[slicksierra]

https://vimeo.com/128038113


Sent from my iPhone using Tapatalk

Love the build dude


Sent from my iPad using Tapatalk

 

[Jake747]

Not sure dude but it's enough to scare me.


Sent from my iPad using Tapatalk

My guy is also a cam motion dealer so he can just grind you one there

 

[j.mo]

I have a comp cam in my truck. Been in there a year without issue

 

[Jake747]

I have a comp cam in my truck. Been in there a year without issue

As do I. But I run good oil too. Redline 10W-40 always

 

[slicksierra]

As do I. But I run good oil too. Redline 10W-40 always

So as I understand it you have to run heavier oil after a cam swap. What determines the weight you use

 

[Jake747]

So as I understand it you have to run heavier oil after a cam swap. What determines the weight you use

Personally I went with my tuner's advice but climate/temps would play a factor. I like the Redline 10w-40 as it doesn't get too thin when hot. With oil temps in the low 200's, I can still maintain 45psi at idle and 50 under any throttle with a HP/SV pump. LS7 lifters, BTR platinum PR's, stock rockers with Comp trunion upgrade and Comp cam 23x 24x 62x 62x 113 with 14* overlap.

I also look at oil as protecting my investment. Is $11 /qt too much when you have $15k in your motor? No.

 

[slicksierra]

Personally I went with my tuner's advice but climate/temps would play a factor. I like the Redline 10w-40 as it doesn't get too thin when hot. With oil temps in the low 200's, I can still maintain 45psi at idle and 50 under any throttle with a HP/SV pump. LS7 lifters, BTR platinum PR's, stock rockers with Comp trunion upgrade and Comp cam 23x 24x 62x 62x 113 with 14* overlap.

I also look at oil as protecting my investment. Is $11 /qt too much when you have $15k in your motor? No.

good point i think you should make a build thread on this beast


Sent from my iPad using Tapatalk

 

[Jake747]

I can do that. No problem. Next Monday will be 3 years ago that I bought it bone stock and laughed at the salesman that offered to sell me a warranty...

 

[slicksierra]

I can do that. No problem. Next Monday will be 3 years ago that I bought it bone stock and laughed at the salesman that offered to sell me a warranty...

Haha well that's ballsy

 

[Jared]

Cam motion uses better blanks imo than comp. Pat can do either. Check his site out first. There's info there. Then decide based on what you feel is best. Plenty guys running comp without issues.

 

[slicksierra]

Cam motion uses better blanks imo than comp. Pat can do either. Check his site out first. There's info there. Then decide based on what you feel is best. Plenty guys running comp without issues.

Thanks dude, not gonna put all that effort into a 4.8 though. After I get back from my officer basic course in benning this time next year I wanna swap a 370 in it. Cause I'll have boku bucks rofl


Sent from my iPad using Tapatalk

 

[Jared]

[video]http://vid39.photobucket.com/albums/e175/fredwho/20150921_203712_zps5hlej5sw.mp4[/video]

PB is being gay
http://vid39.photobucket.com/albums/e175/fredwho/20150921_203712_zps5hlej5sw.mp4

 

[j.mo]

Sounds sick!!!

 

[Jared]

Thanks

 

[Khaos]

Sounds great. That's just LTs right, no cutout?