Brett making his thread reminded me of mine on fgtgmfs
There are very few pics and limited info on the 2 step process along with before and after photos of this product being used. I will be doing a before/after detail this evening when it cools down a bit. Hope this will help anyone thinking about purchasing this. I bought it after many recommendations from several forums and online reviews, but never got around to using it. And I am by no means a detailer, matter of fact, Big Ben is lending a hand to school me on detailing my truck soon.
AFTER OIL:
My only mistake was not getting the driver side. I thought I had one, but was mistaken. It looked about the same as the oiled pic, just not as dark of course. The oil brings out all cracks and crevices made.
Finished:
I want to take photos tomorrow after it sits for a while. I've read that it continues to rejuvenate after a couple days or so. I believe that the seats were still a bit wet, so that is why you still see the cracks so much. If not, then it us just dirt I failed to get out somehow as my seats weren't that dark in the cracked areas before the treatment.
Only half the photo came out for some reason. POS camera!
I used a sprayer to spray and rub in the cleaner by hand, I let it set for 10-15 minutes or so while I was doing the other seats. Once it had sat I took a warm, damp MF towler and massaged the cleaner into the cracks. I wiped it down, rinsed, and repeated several times until it felt clean. I moved on to the other seats and repeated steps. Once all the oil was cleaned off I switched to a clean MF towel, and rinsed one last time. After I felt it was as cleans as my patience could take I used one last MF towel to "buff" the seats
There are very few pics and limited info on the 2 step process along with before and after photos of this product being used. I will be doing a before/after detail this evening when it cools down a bit. Hope this will help anyone thinking about purchasing this. I bought it after many recommendations from several forums and online reviews, but never got around to using it. And I am by no means a detailer, matter of fact, Big Ben is lending a hand to school me on detailing my truck soon.
AFTER OIL:
My only mistake was not getting the driver side. I thought I had one, but was mistaken. It looked about the same as the oiled pic, just not as dark of course. The oil brings out all cracks and crevices made.
Finished:
I want to take photos tomorrow after it sits for a while. I've read that it continues to rejuvenate after a couple days or so. I believe that the seats were still a bit wet, so that is why you still see the cracks so much. If not, then it us just dirt I failed to get out somehow as my seats weren't that dark in the cracked areas before the treatment.
Only half the photo came out for some reason. POS camera!
I used a sprayer to spray and rub in the cleaner by hand, I let it set for 10-15 minutes or so while I was doing the other seats. Once it had sat I took a warm, damp MF towler and massaged the cleaner into the cracks. I wiped it down, rinsed, and repeated several times until it felt clean. I moved on to the other seats and repeated steps. Once all the oil was cleaned off I switched to a clean MF towel, and rinsed one last time. After I felt it was as cleans as my patience could take I used one last MF towel to "buff" the seats
Last edited:
