UPDATE: When I changed internet providers the original photos were lost.
I reenacted the install and took the photos when I replaced the OEM door speakers...
a how to sticky ain't worth much without photos IMO.
For those that haven't done there handles or removed the door panel...
Nothing to it... about 30min for each side.
This is for the models without power windows or locks but most info is the same
except for unplugging the window and lock electrical plugs.
Basic tools needed: GM window handle clip removing tool, 10mm & 7mm socket,
10mm wrench, flat screwdriver.
After you remove the window handle just push the clip back on and the handle is ready to pop back on and you won't loose the clip.
There are three 7mm screws, one under the lock, grab handle and lower bottom of panel.
Pry off the mirror access panel
Now the door panel is ready to remove. JUST LIFT UP TO REMOVE don't pry out like older cars or you'll brake off the plastic retaining hooks.
There are two access holes for two of three 10mm handle bolts.
Reach inside the panel with a 10mm wrench to remove the 3rd bolt
Now just reverse the same steps to finish up and don't forget the
lock cylinder clip and test the lock before you replace the interior panel...
and be sure to clock the interiors window handle in the same position as the other side (2:00 clock)
