DIY garage floor coating

linden

New member
Mar 30, 2012
634
88
0
39
Cape Coral, FL
Anyone done a roll out epoxy style floor in their garage? I was going to do checkboarded VCT but it would cheaper to do epoxy and less maintenance. VCT would run around .75 cents a sf and epoxy seems to run around <.40 cents a sf. Any products you guys have used and hated or loved?
 
My dad and I did rustoleum on the garage we built, there are scratches from jacks and even where the back tires Camaro sits from engaging into reverse from park.

I personally like it and it was pretty cheap, but definitely not scratch proof. We figure we can do it again when it gets too bad and still come out more affordable than the more expensive kits.

Much better than bare concrete.
 
Last edited:
My cousin did, and after seeing his, I don't want to do it. Or at least not the one he used (I'll get the name).

Maybe spray it rather than rolling it.
 
If and when I get a shop built I will be doing mine but with some kind of grey flake type color that can be recovered after a year or two of abuse.


Sent from my Samsung Galaxy SIII using Tapatalk 2
 
I have done a few of these floors and I am less than impressed. It's entirely in the prep work otherwise it won't stick. Make sure you sweep, mop and acid etch the area first. But even still I've almost never seen one that didn't start chipping just from normal wear and tear
 
Just to clarify...there are no chips or anything out rustoleum floor, just scratched paint. If your floor gets used and abused I doubt anything will be scratch proof. We use our garage like a garage. If you just park in it, I'm sure you will have a perfect looking floor...

Remember, this stuff doesn't stain like bare concrete. This is the reason we have it. You spray the stain and take a squeegee, stain is gone. Our other garage floor is stained like crazy.

If I was building a new garage again I would definitely use it again.
 
Good thread, been pondering doing this myself at the new place.

Anyone have any pictures? I'm curious to see how grey ( or lack of) some of these greys really are.
 
My dad and I did rustoleum on the garage we built, there are scratches from jacks and even where the back tires Camaro sits from engaging into reverse from park.

I personally like it and it was pretty cheap, but definitely not scratch proof. We figure we can do it again when it gets too bad and still come out more affordable than the more expensive kits.

Much better than bare concrete.

Thats the same stuff we used in my bedroom in at my parents house when i was in highschool(basement) my futon scratched the hell out of it
 
I have done a few of these floors and I am less than impressed. It's entirely in the prep work otherwise it won't stick. Make sure you sweep, mop and acid etch the area first. But even still I've almost never seen one that didn't start chipping just from normal wear and tear

^This. It's ALL in the prep. If the floor is brand new, I'd go ahead and splurge and get the good stuff. Like industrial style as in what dealers use for their floors. If it's an older floor, I wouldn't even bother.

For example, our garage floor has been used/abused/stained/scratched/etc for 15 years now. Now amount of acid/prep would make anything stick to this floor.
 
thanks for joining and spamming, we appreciate your time and effort

-Jared
 
Last edited by a moderator: