Sitting here with lots of nervous energy today and I realized I never started a build thread ( not that I've done a whole lot in comparison to some), plus I figure it'll give me a place to post up questions/things that wont get lost as easy.
Details:
2004 Chevrolet Silverado Z71 - bought 12/07 w/43k on it
Leveled, Bilsteins, Esky 18's, CAI, Black Bear, Dynomax Race Bullet, 4" Stainless tip over axle, Big 3, 200a Alt, Pionner DVD, JL components, Pioneer 10", L.E.Ds, H.I.Ds Low/Fog 6k,Esky Cluster, 25% Tint rear, 35% front, color matched handles, esky interior handles, DL3s
Pictures from along the way:
Debadged/Demolded
No more pinstripe and a quick detail
Antenna delete mod/esky cowl piece
Leveled
100k
Inside
18" Escalade Takeoffs
W/black bow tie mod
Another detail
CGM NJ Annual Meet Year #1 W/Khaos,Ginger,Bassmaster
CGM Brewery Meet @ Flying Fish loading dock
CGM NJ Annual Meet Year #2 W/FFB,Ginger,Khaos
All my favorite things about fall
As it sits now
There is a bunch of things I've had to fix, most are the typical issues with these trucks (EBCM, ISS, Cluster) and a few things I've done that I done that I don't have pictures of (CAI,footwell lights, full led interior and exterior lights, big 3, cleared headlights).
Future plans are to get the rockers done, 06 valance, get the tailgate handle that's been sitting in my basement painted, Weathertechs, a good detail, color match mirrors, replace carpet, chrome lp lights, e-fans, paint grille insert, and
whatever I else I'm sure I am forgetting
Its been 120k miles and 9 years, most of which it spent as a DD. This past summer I picked up a beater (2000 Infiniti G20) to slow down the wear and tear a bit. Through a combination of a few things I finally have a little more money and time to play with it and am starting to take care of things that I've put off (headliner replaced, getting rockers repaired) and get excited about it again
Details:
2004 Chevrolet Silverado Z71 - bought 12/07 w/43k on it
Leveled, Bilsteins, Esky 18's, CAI, Black Bear, Dynomax Race Bullet, 4" Stainless tip over axle, Big 3, 200a Alt, Pionner DVD, JL components, Pioneer 10", L.E.Ds, H.I.Ds Low/Fog 6k,Esky Cluster, 25% Tint rear, 35% front, color matched handles, esky interior handles, DL3s
Pictures from along the way:
Debadged/Demolded
No more pinstripe and a quick detail
Antenna delete mod/esky cowl piece
Leveled
100k
Inside
18" Escalade Takeoffs
W/black bow tie mod
Another detail
CGM NJ Annual Meet Year #1 W/Khaos,Ginger,Bassmaster
CGM Brewery Meet @ Flying Fish loading dock
CGM NJ Annual Meet Year #2 W/FFB,Ginger,Khaos
All my favorite things about fall
As it sits now
There is a bunch of things I've had to fix, most are the typical issues with these trucks (EBCM, ISS, Cluster) and a few things I've done that I done that I don't have pictures of (CAI,footwell lights, full led interior and exterior lights, big 3, cleared headlights).
Future plans are to get the rockers done, 06 valance, get the tailgate handle that's been sitting in my basement painted, Weathertechs, a good detail, color match mirrors, replace carpet, chrome lp lights, e-fans, paint grille insert, and
whatever I else I'm sure I am forgetting
Its been 120k miles and 9 years, most of which it spent as a DD. This past summer I picked up a beater (2000 Infiniti G20) to slow down the wear and tear a bit. Through a combination of a few things I finally have a little more money and time to play with it and am starting to take care of things that I've put off (headliner replaced, getting rockers repaired) and get excited about it again
