Bagged NBS Thread (99-07c) Pics & Discussion
- Thread starter Zach.
- Start date
Bagged NBS Thread (99-07c) Pics & Discussion
Well now that I've got my bed and checked everything over. I'm going to let everything be known. I wanted to tuck more wheel. So I inspected under the cab and clearance sections and discovered I could body my truck 2" and not have channels in the floor, no cutting of the tranny tunnel, and no cutting of my bedfloor. Of course I moved all the mounts 2.75" down because i don't want to redo that later if I do decide to lay rocker later. All in all I do not regret only doing the work for 2" lower.
Sent from my iPhone using Tapatalk
Well now that I've got my bed and checked everything over. I'm going to let everything be known. I wanted to tuck more wheel. So I inspected under the cab and clearance sections and discovered I could body my truck 2" and not have channels in the floor, no cutting of the tranny tunnel, and no cutting of my bedfloor. Of course I moved all the mounts 2.75" down because i don't want to redo that later if I do decide to lay rocker later. All in all I do not regret only doing the work for 2" lower.
Sent from my iPhone using Tapatalk
Last edited:
That's perfect imo. I wouldn't really want a truck that laid rocker unless a) it was a full time show truck that didn't get driven much or b) i didn't car much about the condition of the body. That sits absolutely perfect to me.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Sent from my SAMSUNG-SM-G935A using Tapatalk
So this just happen to me last night fml first bagged truck so i need the help or tips on what i prob did wrong
[/URL][/IMG]
Ya it started squeakin loud so i went under an checked and that what i found.... an ya my bag is centered but its dead centered i think i need to move it up an ya that will mean i have to notch it a little cuz the bag will rub if that what i think ur talkin about
- - - - - - - - - -auto merged double post- - - - - - - - - -
[/URL][/IMG]
My firstt bagged truck i done so i was thinkin my life was over lol
- - - - - - - - - -auto merged double post- - - - - - - - - -
My firstt bagged truck i done so i was thinkin my life was over lol
Not really sure what that says your bag maybe center front to back of the bar but it's definitely not centered side to side. The center of the bag needs to be center on the bar not half of it hanging off. When it's hanging off, the bar twist cause there's no support under half the bag.
it appears you bought the nfamus wishbone but i'm not sure where the lower bars came from because nfamus does not sell those in their kit. My advice would be to change the bag placement to where its centered on the lower and and change the axle tabs out while you're at. they look a little on the thin side. If you're against pocketing your frame, then run Firestone F9000 taper sleeve bags off the back of the axle.
Yes on the wishbone and the bars from ekstensive they look rusted cuz i sanded them down for paint but left for 7 months and barely go back to it
if the bag doesnt get centered on that bar, it will keep eating bushings,
on top of that, i cant believe they dont have a gusset going the length of the bar, to keep it from bending.
on top of that, i cant believe they dont have a gusset going the length of the bar, to keep it from bending.
