Bagged NBS Thread (99-07c) Pics & Discussion

My first nbs. Parted it out in 2010 and bought a better platform. Pic also doesnt show the hd clip swap but pretty much the same.

Had the kp 6 link as well. Got my 6 link, 8 valves, 2 bags, and shocks for 1000 shipped used on ebay. Think i sold Cantilever for like $3-400 and got $500 for the 4 link separate on ebay.


1qk95t.jpg
 
Last edited:
Opinions in where to mount my vu4 manifold and switch speed ecu? I'm thinking between the tanks and compressors



Sent from my iPhone using Tapatalk
 
All cleaned up. Vu4 is probably going to be mounted to the right between tank and compressor. Gauge sending units to the left. Ecu for switch speed in the cab behind the seat





Sent from my iPhone using Tapatalk
 
Don't have any pics, but a little wisdom. I mounted my battery behind my front bumper in between the Frame horns and made jump posts in the engine bay incase the truck needed a jump.

A clean way to do the fuze box is to mount it between the hydro boost and the motor, Brett should chime in and post pics of that.

I welded a piece of flat to the side of my frame, ran it vertical and drilled two holes in it to mount my computer which had to be relocated.

Air filter was just $35 worth of shit from oreilleys. Adapter from throttle body to maf sensor and from maf sensor to filter. Can kind of see it here. Just a stubby little thing.
asedesyg.jpg




What ever happened to this guy? Did he ever finish that truck? I noticed he got banned?..