Bagged Crew Cab
- Thread starter Wicked Mayhem
- Start date
No problem
Pretty straight forward. Just cut out fender however high you need, trim tub to fit. Weld in.
Bought a Pioneer AVH-X8500BHS, kenwood CMOS-210 camera, and PAC steering wheel controls/wiring harness adapter. I bought a microbypass kit off ebay last night as i have not seen a how to on bypassing emergency brake shit online.
looking into different cameras that i may be able to mount up higher into the bulkier tailgate cap..
looking into different cameras that i may be able to mount up higher into the bulkier tailgate cap..
I bought an avh-x4500 back in January.. on these new pioneer models you can't run a relay like the older ones due to a change in software, so I just ran a switch to power on the harness and to a ground and when I put a movie in I just flip the switch and go about my business
Still need to pick up steering wheel harness and backup camera
Still need to pick up steering wheel harness and backup camera
This one shows to work with mine, and yours.. we will see.
Authentic Microbypass Parking Brake Bypass Pioneer AVH X8500BHS AVH X8500BHS New | eBay
Authentic Microbypass Parking Brake Bypass Pioneer AVH X8500BHS AVH X8500BHS New | eBay
Niice, interested to see how that works out..might have to pick one up and do away with the switch all together
I wanted to put it on a relay so that when the ignition got power it would click and you could automatically watch movies but something about the new software won't let a relay work..you either have to run a switch or bypass like you bought
I wanted to put it on a relay so that when the ignition got power it would click and you could automatically watch movies but something about the new software won't let a relay work..you either have to run a switch or bypass like you bought
microbypass works perfect
Guess i should keep my project thread updated as well... did some trading with my old man. Got his wheels/tires and axles. He machined the axles down a little more so i could tuck the wheels. Narrowed 8-3/8" overall. Modified lower link bars and widened wheel tubs 2". Finished welding them all up this evening. Going to start grinding them down tomorrow.
5lug conversion(redrilled hubs, rotors and drums) moser axles. 20x8.5 6.25" backspace 245/45 and 20x10 4" backspace 315/35
Guess i should keep my project thread updated as well... did some trading with my old man. Got his wheels/tires and axles. He machined the axles down a little more so i could tuck the wheels. Narrowed 8-3/8" overall. Modified lower link bars and widened wheel tubs 2". Finished welding them all up this evening. Going to start grinding them down tomorrow.
5lug conversion(redrilled hubs, rotors and drums) moser axles. 20x8.5 6.25" backspace 245/45 and 20x10 4" backspace 315/35
i thought he was getting it line-x'd or rhinolined after this. could be mistaken though
Unsure at the moment. I may just have my buddy repaint the tubs for now since he still has left over paint from my handles. And that will be way cheaper then a bed liner. And i can still get it bed lined later.