*99-07c 2WD Drop Parts and Recommendations*

I can't comment on that, but I would seriously stay away from these if my truck was heavier than a CC. I shattered my t-bar on one, the other was heavily bent when I took it off. The rears are way to soft and I bottom out. They ride better than my stiff ass Belltech shocks, but not much better.
 
My big hangup is the ball joints. I've never done them so I have no clue how to move forward

galaxy s3
 
just get all new, oem style LCAs.....WAY easier than trying to punch those damn rivets out.

I had to grind the heads off, drill into the rivet stud and punch them out with an air hammer...HUGE pain in the dick to do.
 
I assume its a bolt in bj on those. I ordered 3" springs today with shocks to go with the 6" rear. Ill move on to spindles and do a 5/7 by summer

galaxy s3
 
Hope I'm asking in the right thread.
Is there a fix for the early 16" belltech drop spindles?
I'm having braking issues when turning.Anyone else?
 
Does the pedal go to the floor? If so the brake line might be getting pulled, make sure it has enough slack and is routed correctly.
 
Hope I'm asking in the right thread.
Is there a fix for the early 16" belltech drop spindles?
I'm having braking issues when turning.Anyone else?

I remember that day. Yes, the brake line is getting pinched/pulled, get some zip ties and mount it to the UCA. Fuck those spindles BTW if they really are the early ones.
 
yes I think they are the early ones! what a pos! so are the "new 16s" 2508 ?
Any other fixes for these?
Gonna try to get new ones, but dont want more issues!
 
Bringing this back from the dead..... I have a 03 silverado rcsb doing a 2/4 drop... spindles , shackles and hangers.... If i use the belltech 4302 1" drop coil would I also need a drop shock ?

Asking because I just put on new bilsteins

Thanks