2015 Semen Trok Build Thread

I liked your other one mo betta. Interested to see what you do with this one, though.


Sent from your girls iPhone.

Truck was stale to me TBH, all I really had left to do was 4 link rear and powder the axle, never drove it just looked at it lol

You're changing the 2 things I don't like. Wheels and grill. Fucker is huge.
yeah she huge lol
Thank you for changing the wheels. Srs.
Have fun with it man. But I'm learning new trucks aren't as fun to mod as trucks a few years old lol. Not as much parts and info available, and like you said shit is way more expensive and more complicated. But I don't have dat corny time and money either lmao

yeah, I knew NBS trucks inside and out... literally everything.

I actually agree with Johnny since I don't like the new trucks stock or modded. Pretty cool that it's still basically new and has that much done to it

just rolled over 4k miles, I need to make it my own still. Feels like I have someone elses truck parked in the shop.

I think I just pictured you to be older lol.

Sent from my SM-N900V using Tapatalk

I met Kyle like 7-8 years ago now so I always knew what he looked like.


:corny:
 
I really like the grille, but I'm sure Matt is gonna make an awesome one. Yes to adding chrome handles and trim back, Denali's need chrome.

Wheels are terrible, and I just noticed the rotors are rusty, figured AA would have powdered them like every other full build truck in California.
 
I really like the grille, but I'm sure Matt is gonna make an awesome one. Yes to adding chrome handles and trim back, Denali's need chrome.

Wheels are terrible, and I just noticed the rotors are rusty, figured AA would have powdered them like every other full build truck in California.


None of the AA trucks rotors were done, they flake after a little while from what I've seen.
 
Glad you're changing this truck up. I feel like the idea of "over the top" kind of took this truck to a bad place IMO. Will be nice to see it cleaned up.

Thank god those wheels are going away.


Sent from my iGloo using dogsled
 
1GT12ZE88FF513472, thanks man. Just want to make sure I get the right ones. New trucks are so funky. I like the CM mirrors but the old style date the truck a lil IMO. I don't even know if I can do the powerfold ones yet.



I like how the Denali's look. So much chrome under the truck just not much anywhere else besides the front end.
So 98% positive your sensor is NOT in the mirror.

Right hand mirror p/n without sensor is 23241618

W/ sensor it would be 23351802

The sensor p/n for the sensor itself is 13583411 and will be located on the passenger side angled radiator core support towards the top on a tab off of the support member. I can get you a diagram if you need it.
 
So 98% positive your sensor is NOT in the mirror.

Right hand mirror p/n without sensor is 23241618

W/ sensor it would be 23351802

The sensor p/n for the sensor itself is 13583411 and will be located on the passenger side angled radiator core support towards the top on a tab off of the support member. I can get you a diagram if you need it.

Damn man thanks a ton! You saved me a bunch of time lol I really appreciate that. I'll double check and get those mirrors ordered.
 
Damn man thanks a ton! You saved me a bunch of time lol I really appreciate that. I'll double check and get those mirrors ordered.
I should've mentioned those aren't the tow mirror p/n' s. If you need those I can see what I can find as well.


EDIT: just in case you needed these too
Chrome door handle set - 22940657
Black Sill w/GMC chrome insert - 23114162

EDIT2: I also found this upon some further research: (Yours is RPO I06)

2500/3500 Trucks with Radio RPO IO4, IO5, IO6

Ambient Air Temperature Sensor >>> (hard wired circuits 636 and 61) >>> Instrument Panel Cluster >>> (Low Speed LAN) >>> Radio Tuner >>> (MOST Buss) >>> HMI >>> (LVDS Cable) >>> Integrated Center Stack Display

After the Instrument Panel Cluster sends the ambient air temperature out on the Low Speed LAN buss, the HVAC Control Module also uses this information for HVAC related requirements.

TIP: The Ambient Air Temperature Sensor located in the passenger outside mirror on trucks equipped with the 6.6L diesel engine is not used for the ambient temperature display that is located on the radio or for HVAC-related requirements. This sensor is used only for power train requirements. The Ambient Air Temperature Sensor used for the radio display and HVAC is located behind the right side of the grill.






So apparently there are two sensors, one in the grill and then on the 6.6s one in the mirror. If this holds true the tow mirror part numbers would be 23241467 And 23241465
 
Last edited:
I saw the list of body and paint mods rocky has planned for your old truck.

Not all too excited about it, but it's his so whatever floats his boat


Sent from my iGloo using dogsled
 
I saw the list of body and paint mods rocky has planned for your old truck.

Not all too excited about it, but it's his so whatever floats his boat


Sent from my iGloo using dogsled

lots of white lol.

I'm doing the opposite :corny:

My chrome handles showed up yesterday, and 120 bolt covers too
 
Can you just roll one of the welds up next to it for shits n gigs? Would be jesty

yes lol... they are sitting in the shop not mounted cause I gotta polish them.

Time for me to grandpa, chrome handles showed up gotta see how they look vs. CM'ed.