2000 Silverado 2500

[Huck]

Damn, those look beefy. I've been planning on doing Cognitos on my truck, maybe I should look at some others too

 

[temoney14]

Damn, those look beefy. I've been planning on doing Cognitos on my truck, maybe I should look at some others too

I was gonna go Cognitos but these were quite a bit cheaper and Will_I_Am installed some so I was comfortable with them. They were worth every penny, rides so much nicer

 

[temoney14]

Cleaned the truck this weekend, my brother and his gf hooked me up with some rolling shots, haven't had time to edit any and the truck needs a full detail bad but at least I got to put a coat of wax on it.











Some hardcore mudding

 

[Huck]

Looks damn good dude! I forget, what size tires are you running?

 

[temoney14]

Looks damn good dude! I forget, what size tires are you running?

275/65r20, sorry bro I must have missed this post! Measures to about 34x11

In other news picked up a topper, mainly for winter but might run it for a bit. Only cost me $100 and it matches, needs a little adjusting and it I'm tinting the side windows tonight

 

[marc]

was about to post that you should tint cap .....then read post :facepalm: :up:

 

[Huck]

275/65r20, sorry bro I must have missed this post! Measures to about 34x11

In other news picked up a topper, mainly for winter but might run it for a bit. Only cost me $100 and it matches, needs a little adjusting and it I'm tinting the side windows [/URL]

Oh it's all good dude, was just curious cuz that's what I thought you were running. I bought some 275/65 ATs for my truck and they looked retarded, still can't figure out why they look good on leveled HDs but look too skinny on 1500s lol

 

[Ginger]

zach, zone doesnt make a UCA for our trucks last i checked, thats why i got cognitos on mine.

woth the money IMO

 

[Huck]

:shake: Haven't actually looked into anyone other than Cognito, didn't actually know if anyone else made them for 1500s. That's probably what I'll go with then

 

[Ginger]

RC makes a set, but they look like someone used pencils and gorilla glue to make them.

 

[Huck]

Lol

 

[temoney14]

Well I thought I was done with this truck and just gonna ride it out for a few years, but was talking to some guys and I'm considering doing some motor work now, giving her a little more get-up-and-go. Any suggestions?

 

[Huck]

Boost. Lots of it. /thread




:cheeky:

 

[Fiesty]

LTs, e-fans, and a Blackbear tune. I'm sure you'd be happy with that and you could probably do it all for under $1k. I did those mods to my truck for under $750 but I found deals.

 

[Alecks]

What Kylie said. Will wake it up.


Sent from my iPhone using Tapatalk

 

[Molly]

Heard dmax swap makes it faster


Sent from your girls iPhone.

 

[temoney14]

Boost. Lots of it. /thread




:cheeky:

DFW Boost but dnw the cost of boost

LTs, e-fans, and a Blackbear tune. I'm sure you'd be happy with that and you could probably do it all for under $1k. I did those mods to my truck for under $750 but I found deals.

Probably the route I'll take, I can get a good deal on some 853 heads ported exhaust side with retainers and springs for $150, I know any heads would be better than my iron heads but idk if I should dig that deep. Can get a deal on e-fans though so I'll probably take this route.

Heard dmax swap makes it faster


Sent from your girls iPhone.

Send me one of the lbz blocks and I'll swap it

 

[Huck]

If you're doing heads, might as well mill them a tad, do cam and valve train while you're at it. Orrrrr just find another 6.0 and start a 408 build. It'll take longer but it'd be better in the end

 

[Fiesty]

I wouldn't mess with heads. But if you did I'd run factory 243s or 799s if ur gonna run a mostly stock motor.

 

[Ginger]

im happy with the efans on mine.

once i replace my knock sensors, if i still have a cat code, it may be time for some stainless longtubes.