05 CCSB slow build

made myself a lil amp rack...didnt want to put the amps under the seat but with this new box, i had no choice

MDF cut, rounded and sanded
20160212_151630.jpg


Lil dry fit
Attach12900_20160211_172058.jpg


Attach17764_20160228_143943.jpg


Rack had to match paint...so
Attach13350_20160212_161132.jpg


Attach13361_20160212_165847.jpg





New gauge panel, courtesy of HackMcMaster himself
Attach21143_20160313_162204.jpg


Gonna send it off to get it engraved with COMP/UP/DOWN under corresponding buttons
 
So after seeing the wireless charging mod and talking to Pat about the "Oktaint mod"....I decided Im gonna copycat him and try to do this on my console lid. I already took off the lid and verified theres room in there...now I just gotta wait on the parts to get here.

Took the lid off the console and removed the 8 phillips screws holding the 2 pieces together and shaved a rib off
20160324_201637.jpg

20160324_201644.jpg


Lil more
20160325_125207.jpg


All gone
20160325_125410.jpg


I put it back together and I can now squeeze the two halves and can feel a gap between the two.


Once I get the charging pad, I'll throw it in there and see if I have to shave off some of the ribs on the top piece
20160324_201653.jpg
 
That's a pretty cool idea, seems like it wouldn't be very effective if you were picking up your phone while driving at all, still really cool

Sent from my HTC One M9 using Tapatalk
 
Friday :happehdog:

- - - - - - - - - -auto merged double post- - - - - - - - - -

Changed spark plug wires and cleaned the TB n MAF last night....also made a lil progress on the wireless charger mod.

20160329_203935.jpg


So far it only charges with the slim case on the phone....wont work with my otterbox knockoff.

So Im either gonna cut a small hole on the lid
20160329_203949.jpg


or Im gonna heat it up and mold it into place from the top, so only the lil plastic mat covers it.
 
Last edited:
2005_Silverado said:
Friday :happehdog:

- - - - - - - - - -auto merged double post- - - - - - - - - -

Changed spark plug wires and cleaned the TB n MAF last night....also made a lil progress on the wireless charger mod.

20160329_203935.jpg


So far it only charges with the slim case on the phone....wont work with my otterbox knockoff.

So Im either gonna cut a small hole on the lid
20160329_203949.jpg


or Im gonna heat it up and mold it into place from the top, so only the lil plastic mat covers it.
Click to expand...

The fuck is that? :mindblown: :karl:
 
its one of these split open....its a 2 piece design....so ur looking at the inside of the top half, the part where u normally put ur arm if u aint got a W/T.

s-l225.jpg


Am putting a wireless phern charger in there, a la Oktaint

- - - - - - - - - -auto merged double post- - - - - - - - - -

so after trying to get the damn charger in between the lid pieces....turns out it wont charge because of all the plastit in between the pad and phone.....so on to plan B I went. I heated up the center section of the console lid and made a lil hole for the board. Then I drilled a hole to run the usb cable thru. I tested it in this co figuration and it works perfectly.

20160330_194719.jpg


- - - - - - - - - -auto merged double post- - - - - - - - - -

heres the liner on top...cant tell its there
Attach24663_20160330_195830.jpg


Originally, plan was to sandwich it between the two pieces
Attach24671_20160330_200514.jpg


But I think this worked out good too....was able to make a lil hole for it so the coils are flush with the rest of the lid
20160330_194823.jpg
 
You must log in or register to reply here.
Top Bottom