06 RCSB bagged bodied billets

Tukn4s

Tukn4s

New member
Jan 24, 2011
1,856
268
0
Starting A customer build.
2006 Silverado rcsb
Airlift 3h
Flo air ride dual 28" tanks
24" intro Dakota's
Unparalleled customs front kit and 3 link
My normal mods
e093351086f50270473e43ed081911ac.jpg
a03b31808ac2f37995db66b860861343.jpg
 
  • Like
Reactions: James Pate, Dakota, dszx13 and 1 other person
Working on the cab still. Just a lot of spot welding. Going to make for a nicer seam on the outside doing all the welds on the inside. Going to be doing a more direct transition on the transmission tunnel.
c85b2a60e0094a412948dfd112426d02.jpg

619b47c2d6114b7678dbdc2c0d6a7be7.jpg


Welded a 6an fitting on the fuel rail to eliminate the need to make a new fuel line and have it sticking out over the driver valve cover.
01bc4b1b2d388ca77ba82284146f0335.jpg

c56b04d061aa0cd8093e8e5324d064e5.jpg
 
  • Like
Reactions: BB, mike. and Graystone
Made some more progress yesterday. Get a 97-04 LS evap valve which uses the same plug as the truck valve so it looks factory.
a48d9c6c1a0e17a7cda91f63d7a54ba5.jpg

b6ced58cceb81dad6536e1e8dc2c5289.jpg

Clearanced the truck accessory bracket
06de972ee9a8dc50fa8fe9fbe38e57c2.jpg

Started filler plates for the sides of the firewall tub
d4e93e0e26f0ccec7d61d326ca2b52a4.jpg

014ffdddbc9b3309c9802a54397d16a1.jpg

Set up the front suspension and dropped the front frame section
e377cf597980c01c87fc04dd19b4d9e8.jpg

Cycled to check my clearances. Stroked the wheel 1" passed laid out and clear everywhere by 3.25". So once the cab is dropped. Should have about 1" clearance on the firewall.
9d868d2d3ce44e7b2123a819827a9785.jpg

d2b78772abcdf3a1704d8bac5527562e.jpg

Began positioning the axle and rear suspension
82f21a874a62c9b5e737662e9234cbb3.jpg
 
  • Like
Reactions: dszx13 and mike.
Love seeing step by step progress! Especially when its from somebody knowledgeable. Great work man!

Sent from my SAMSUNG-SM-G935A using Tapatalk
 
Awesome! Was going to ask you today if you did a build thread on here, just decided to reset password and find out. Brett is killing it as usual, his work and customer service is incredible! The 8hr drive in the terrible winter storm was worth every mile of it.
 
Been a week so time to update. Got the cab dropped. The owner decided we might as well do longtubes. I'm going to have to do a new section for the gas tank anyway so I decided to do a mixture of stock floor and channeled. From the firewall to the gas tank is stock floored. Still have to do the tranny cross member.
5625e6dbf15f141b68feab7c9ac3b73c.jpg

b46f66d36e6e254f192f28f7c6fe196d.jpg

da0a79d8d1f5a3346a47b67ba8a96bb3.jpg

8ed75fb98c8a2d6b317d57a019aef01a.jpg

eb0aa9a790c486b60624f768cbbe44fb.jpg

34eafd582108cbb22de025d9fd6f3a5c.jpg
 
  • Like
Reactions: CUB, BB, dszx13 and 1 other person
You must log in or register to reply here.
Top Bottom