Tyler’s 2014 Silverado build thread

[TylerM]

So traded in the 07 a couple weeks back after the hub decided to go at 220k

Picked up this 2014 Texas Edition with 24k

Devalenced and dipped bow tie

Debadged

Curved 40” Totron in

De-flared

Truck has a 6” Pro comp with 5” blocks and an aal in the rear so it has about 2” of rake. Plan to drop down to a 1” block to get 2” of lean.
-Cleared headlights
-wheels/tires when these 35’s run down. Wanting 20x12/22x12/22x14 on 33’s
-remove steps
-LED’s
-Possibly a level in the front/pro comp coil overs
-New exhaust, lose the dronemaster and duals for a single dump


Sent from my iPhone using Tapatalk

 

[lildann]

So traded in the 07 a couple weeks back after the hub decided to go at 220k

Picked up this 2014 Texas Edition with 24k

Devalenced and dipped bow tie

Debadged

Curved 40” Totron in

De-flared

Truck has a 6” Pro comp with 5” blocks and an aal in the rear so it has about 2” of rake. Plan to drop down to a 1” block to get 2” of lean.
-Cleared headlights
-wheels/tires when these 35’s run down. Wanting 20x12/22x12/22x14 on 33’s
-remove steps
-LED’s
-Possibly a level in the front/pro comp coil overs
-New exhaust, lose the dronemaster and duals for a single dump


Sent from my iPhone using Tapatalk

Nice! I love my 2014. Keep us posted on the progress!


Sent from my iPhone using Tapatalk

 

[roundsy]

lots of potential, should be really nice once all the plans come together

 

[tylerreed777]

Got a thing done today.

Also trying to swap my 5” blocks for some 1”, got quoted $380 from a shop lol. Doesn’t seem too difficult to tackle myself tbh


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[Khaos]

$380? That's ridiculous.

Pretty easy to do yourself, just take your time

 

[Huck]

It takes an hour to swap blocks, do it yourself for $20 in beer


Sent from my iPhone using Tapatalk Pro

 

[TylerM]

Got 1” blocks just haven’t had a chance to put them in yet.
Trying to sell my flares and steps to free up some cash for wheels.
Thinking cleared heads, spacers, maybe remove Tejas edition, or billet bow tie next.
Not sure how the billet would look with the all chrome front


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[TylerM]

Blocks in

The pin goes through the mounting bracket and into the axle, I’m assuming this needs to be grind down?
It’s flush on the front

Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[TylerM]

The wider front track is way more obvious now, definitely need spacers


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[BigBoi]

@WildChevys (James) just posted on FB that he was selling two 1.5” spacers


Sent from my iPhone using Tapatalk