Static NNBS (GMT-900 07-13)

Smith

Super Moderator
Staff member
Jan 28, 2011
7,167
398
83
Louisiana
Post up pictures of NNBS with static drops. It can be yours, your friends, doesn't matter. If possible give the drop, parts used, and tire size if you have it. Feel free to add before/during/after shots if you have them.

08' RCSB GMC
4/7 on 2" McG spindles, coil relocators, and a 7" flip kit on belltech street performance shocks.

7a72c477-2.jpg

f8505d85.jpg
 
Hmmm. My pictures are old, from 2010 actually. Maybe I'll grab some better ones this weekend. Updates since these pictures: Back to stock tailllights & Engine bay stuff done.

McG 2" drop spindles & 2" coil relocation kit.
McG flipkit out back with McG helperbags. Belltech street shocks(ftw)

DSC_0010.jpg


DSC_0006.jpg


DSC_0009.jpg


DSC_0020.jpg
 
Last edited:
2/4 drop, 275/55/20s
Front: Belltech 2" adjustable struts
Rear: DJM rear flip kit/lift hangers, 2" lift shackles

DSC00401-1.jpg

DSC00402.jpg

DSC00401.jpg
 
Heres my pile
Belltech springs and spindles up front= 4"
Belltech Flip Kit and Shocks= 7"
Will go 5/8 soon if I ever get the time to put my parts on

DSC00102.jpg


I just put a set of 22s on it and finished my HD swap. Will post pics of it when I can get some decent ones
 
Just the liner on the inside of the fenders. We went 3 inches up front but i didn't have the shit to do 5 out back. i would say 3" is max on the 305/30 with a high offset. i believe mine were +40
 
Bumpppp..found a few pics I had randomly saved off some sites...some are members on here past rides...don't have the specs on all of them however..
d0653717.jpg

e4b81021.jpg

f742187a.jpg

6bf5213a.jpg

f195f223.jpg

6dc36185.jpg

aa8e6866.jpg

f4a10842.jpg

1a5a506f.jpg
 
No doubt...was trying to trade a dude on craigs in Shreveport for a set because he was selling the whole truck but he wanted my stock 20's and $1700 :facepalm3: