So i just got finished lowering my 08 rcsb 4/7 and i used a belltech flipkit, removed stock 1" block, removed stock bumpstop & bracket and belltech SP rear shocks. I'm happy with height and ride on a smooth road but anything else and its a very stiff & bumpy ride... Normal cracks in the pavement sound like i'm hitting a 1ft deep pot hole LOL I've riden in alot of lowered trucks with flipkits and they've rode very good. So i'm at a loss as to what is going on or could be the problem. Any input or advice is greatly appreciated!
NEED INPUT!! 08 nnbs rcsb Belltech flipkit and SP shocks rides very rough????
- Thread starter 01droppedsilvy
- Start date
What size wheel/tires do you have?
How much space do you have between your axel and frame?
Brake lines above pumpkin pushed down?
How much space do you have between your axel and frame?
Brake lines above pumpkin pushed down?
22" wheels with 265/40/22 and theres about 3 1/2 inches between axle & frame, diff isn't hitting the bed.....
My SP's ride stiff, but I don't mind it. Something softer would probably be an adjustable shock like Jared said, or maybe an air shock? I only have experience with the SP's though.
i've heard mixed reviews on them... always hearing how they blow out or start leaking
i ran the nitro 2's on mine they lasted around 2 years i think. not bad, for all the abuse i put the truck though.
did you get the shock relocators for the rear?
did you get the shock relocators for the rear?
No..... I was going to but was told the SP's didnt need them since they were good up to a 7" drop. Do i need them????