So I see people retro their Denali heads. What's the point of that? They already have projectors in them, are the stock ones just not as good as others? And what do you need to retro them exactly?
Sent from Tapashit
Sent from Tapashit
Nbs Denali heads retrofit
- Thread starter CammedVmax
- Start date
The projectors from the retrofit source offer a much better and focused cutoff than the stock projectors. The stock ones still wash out hids and spread too much light causing glare.
You'd need new projectors, relay harness, high beam harness, adapter plates for the new projectors, hids and ballasts.
Or you could just buy mine for sale in the classifieds that are plug and play :crazy:
You'd need new projectors, relay harness, high beam harness, adapter plates for the new projectors, hids and ballasts.
Or you could just buy mine for sale in the classifieds that are plug and play :crazy:
I didn't know you had any!!! I have a wanted thread in there lol. 05gmc has some he might trade me for my stock rear bumper though. It's free basically, so I might just do that.
Sent from Tapashit
If he still wants to do that, I'll just trade with him. I wouldn't do it if it wasn't basically free lol. I'd buy yours if I could lol.
Sent from Tapashit
that's the difference.
I see I see. I'll just run them cleared for a while then I'll retro fit them later. Will be better than reflector housings at least.
Sent from Tapashit
light output is much better. i would do like you plan though thats what i did. ran stock with cleared for a while then put the better projectors in.
I did the same. The difference is you can actually see where you're driving with the retrofit, the stock projectors with the stock bulbs are worse than the original lights imo, and adding hids to halogen projectors really sucks too, they spread all the light around.
