My '95 Sierra Build

-Sean

-Sean

New member
Feb 4, 2011
6
0
0
Awesometown (SCV), CA
Sorry, this is going to be a bit pic heavy...

The build started in January of 2010 and is still going today (slowly).
Specs:
1995 GMC Sierra
factory 350 (needs a rebuild)
Fully caged
39" BFG Projects, Procomp Wheels

Front:
1st Gen BBR Long Travel kit for 88-98 silverados, upgraded with dana 44 hubs.
FOA 12" Coilovers and Fox 2.0 Bumpstops.
BBR engine cage with removeable crossmember and core support.
6" Trailer Products fiberglass fenders.
Trailer Products custom cowl induction hood.
BBR Front Bumper

Rear:
Full Backhalf
Giant/ BBR 3-Link
GMR fully fabbed 9in, 35spline, with BMS/Schreiner hubs.
3.0 King C/O's and 3.5" Fox 5 tube bypasses
Hannemann Rear Glass
32 gallon Fuel Cell

And Now for the peektures

Sean_1.jpg

Sean_2.jpg

Sean_14.jpg

Sean_18.jpg

Sean_21.jpg

Sean_23.jpg

Sean_24.jpg

Sean_25.jpg

Sean_27.jpg

Sean_28.jpg

Sean_32.jpg

Sean_33.jpg

Sean_34.jpg


The only time it really saw dirt, MDR Night Race 2010
Sean_35.jpg

Sean_36.jpg


designing my one piece, will prolly end building it myself if I cant get enough people to go in on it.

2011-01-06_214554.jpg


IMG_3538.jpg

IMG_3541.jpg

IMG_3561.jpg

IMG_3564.jpg


CAGE_1-9.jpg

CAGE_1-9b.jpg

CAGE_1-9c.jpg

20120407_132418.jpg

20120407_164113.jpg

20120407_164123.jpg

20120407_175332.jpg

20120408_174043.jpg


And thats it for now. Progress should start picking back up in a couple weeks hopefully
 
I completely forgot about this site until I saw an instagram post today. Man I've been slacking.

Time for a little run down on the shenanigans that were going on. After bringing it home from the first shop (form the only post I have), and more less getting screwed out of some money that I had already paid for work to be done. I got burnt out and let the truck sit for about 6 months to a year, I don't really remember. Then after doing a bit of research for new fabricators, I came across the guys at LSK Suspension, when I first got in touch with them they were just moving into their first legit shop and decided I wanted them to finish the truck. It started off slow, I let them put it on the back burner to finish other trucks and gave me an opportunity to save more money. And every month there work got better and better at fast rate and before you knew, not much had been done to the truck and they were moving into a bigger shop and San Dimas. No biggy, they did all the work to move the truck to the new shop. And things stayed the same, truck was a 2nd priority to most up until the beginning of the year, I started pressuring them for deadlines and then bam, before I knew the truck was ready to come home. And this is where it sits, 3 years later . "Everything" is done, minus the drivetrain, plumbing, and electrical (FML).

Sorry for the photo dump.







































So after getting the prerunner back, and not having a truck to tow it with, I started thinking about new trucks, diesels, etc. And well about a month and a half ago, after a night of drinking, I decided to tell a friend to buy my 2011 Silverado DD for what I owe on it (Jokingly) and the next morning he comes over saying he approved for a loan and I couldn't believe it...
(The old truck)


So once the sale was final, I went to the dealer and decided to order myself a new 2015 GMC 2500HD, and she finally came in on Monday... then she made her rounds around the shops up here yesterday, and well she wasn't stock for more than 20 miles. How she looks today.
 
You must log in or register to reply here.
Top Bottom