Malikk's 92 s10

Malikk Loftis

New member
Jun 15, 2014
305
90
0
Had this truck since my sophomore year. Always wanted to ls swap it now I'm getting around to it.
0c79d749723ae693634fa1371b00474b.jpg
e9a57d6fd568daa4422dc511c69e50bc.jpg



Was originally going to be a lq9 that I was getting in return for doing a cam swap, and help with an ls swap. Motor ended up having water in it. So I got it and $1200. Have a set of cnc'd 317's from a buddy. Picked up a set of forged Pistons and rods on them for 500$. Motor only had 5k on it. Guys going turbo so I got a good deal. As far as the truck it has a 4l60e and a ratchet shifter. Gonna run It until it blows.
5b89d0143a7f5c4cfaa6cd15409e550b.jpg


244118bb064a5dcc7f3fc43f1e3da7b9.jpg
c980bfcb7dbb9cddd908cb4f77b7871d.jpg


Sent from my iPhone using Tapatalk
 
Last edited:
Whatchu do for a living bruh? I need a new job lmao.

Specs on the vette?

Sent from my SAMSUNG-SM-G935A using Tapatalk
 
I run a trucking company. Don't let the stuff fool you I'm a broke ass 19 year old college kid. Just don't have any bills lol. The vettes a ls2 car, cam headers, clutch, z06 axles, and built t56 by a local shop. Car was dyno'd by previous owner and made 490 wheel

Sent from my iPhone using Tapatalk
 
Last edited:
Time to get this show back on the road. I ordered mounts last week to jump start building this damn thing. Pulled the motor apart and the bottom ended up looking fine after cleaning it up. With that being said, I'll be putting my rotating assembly aside for when this one pops.


Before
512c3a1e743daa90bc6b0c95a5d38791.jpg
fcb7a5420cfa2268901e2b31e1f2f6d5.jpg


After
8e101a01be28c3f70b528411fbbe0be8.jpg

Gonna try running it the way it is if it runs awesome if not I'll just have it rebuilt with my rotating assembly. Jumping back into this build ordered mounts last week the should be here Wednesday
67b4c050a7698b9a4ef4ed57c50ee74a.jpg
459ad43bbfd9d3d34010c58c6fda947b.jpg


My goal is to have the truck running and driving n/a so I can just cruise in it to turkey drag. Then a week after turkey drag I take my finals and will be out for winter break. So I figured I could spend my time pulling it apart to do all the fab work for the turbo. Slowly but surely gonna try and knock it out. I found an 8.8 a 2 hours away and I'm trying to decide whether or not to go get it
cd650da628e08368cb50410913bad2da.jpg



Sent from my iPhone using Tapatalk
 
Last edited:
Mounts came seem to be good quality now just need to see how they fit In
26bf5c61fc849a2b6cae2f421caf1206.jpg



Sent from my iPhone using Tapatalk
 
Say yes to that 8.8, you're gonna need it lol. Those mounts look sick!

Trust me I know lol I'm not sure if I want to get one now or when I pull it apart during winter. With it being so cheap I need to just bite the bullet if I get some time to go get it.


Sent from my iPhone using Tapatalk
 
Well I got these from my old man this week. Ended up pulling the motor. He gave them and a th400 because he won't be using either in his 85. Will probably end up leaving the th400 around until I turbo the truck. Will have pics coming up soon just forgot to take them https://vimeo.com/184136193
6902ff7363bffa83d4ba79864a574fbe.jpg




Sent from my iPhone using Tapatalk
 
Picked my truck up from my dads today to take to a buddies shop to finish the swap. He lives 5 minutes from my house vs 30 for my dads and has a welder. I'll have to notch the frame to keep my low mount a/c compressor.
d59b02678bb69263158d5239b0c565d1.jpg
Pulled the bed to start on the frame and it's filthy.
0f76307c8bd66f5acbc1f9587d8f0484.jpg
8d054c5c57b22962375ee643c5b4c86f.jpg
05730bbf042db5eff42a7bc11cb12963.jpg
last pic for the night but engine bay going be tight lol but can't wait
59bf12114f46a7e4f410bc5cc6a2381a.jpg



Sent from my iPhone using Tapatalk