Well I got a qtp cutcutout but I need to know where the best place to weld it. I have csp lts. Was thinking right after the y but idk if that the best location. Or should it go right before the muffler. Post pics if you have any.
help with cutout location
- Thread starter Silver04
- Start date
Let me know how you like qtp. I'm on the hunt for a good electric cutout. Everyone said dmh was the way to go so I called 3 times and left 2 messages to place an order. Never heard back. So they can suck a nut as far as I'm concerned.
about 10 inches after the y would be the best proformance wise, i know on the racecars they recommend 10 in after the collector before the muffler.
Sure will as soon as I get in welded. There also race ready e-cutouts I've heard good things bout those as well.
There's a thread here I made and I followed a few on pt.net...be sure to read them on which company to buy from.
Doing a bit of a mock up. Looks like the cutout will fit just fine where i want it. But now the issue is with the stock pipe. I have to cut about 6" or so and re-weld the flange back so it can bolt up to the flange from the LTs.
I can easily go the easy route and weld the cut out to the stock pipe, but i wanna change that out for the same ss polished like the LTs
I can easily go the easy route and weld the cut out to the stock pipe, but i wanna change that out for the same ss polished like the LTs