Drop kit question

[Blk06silv]

This weekend we installed a belltech 6/8 drop kit once 96 ex cab silverado after everything was installed we went to move the truck and it will turn full lock to the right but it. Will barely the left and if the truck is moving and you turn left the truck will immediately stop, what could be causing this

 

[Adjusted]

you are crimping a brake line in the left front

 

[Blk06silv]

The wheel won't even turn left when your stopped it maybe turns a half a turn

 

[Adjusted]

The wheel won't even turn left when your stopped it maybe turns a half a turn

then the brake line likely got caught somewhere and you are stretching it until it limits turning, go check.

 

[Blk06silv]

Ill check again when I get back to his house but he has horrible camber which could be the culprit

 

[NORCAL SS]

are you running the alignment kit in front?

 

[Jared]

I bet it's the alignment kit as norcal said, from what I recall, the OBS is a bitch at that much drop

 

[NORCAL SS]

ive done many 6/8s on the single cab 88-98 trucks over the past 18 years you need the front camber kit now way around it.

 

[Blk06silv]

We didn't have the alignment kit, we took the kit of his 89 single cab long bed Chevy and installed it on his new truck, I ended up leaving before it got fixed, cause I had to ride home in 30 degree weather on my bike which equals a shitty ride home but I found out yesterday they fixed it, I didn't ask how though

 

[Jared]

report back