Ok so I'm redoing my air management and need another set of eyes to see if there's something that I'm missing, or possible issues I may run into. More so for servicing wise than anything cause I can't really tell mocking up everything with the bed off. Maybe any routing issues, or won't be able to access something later.
Before
Mocked up, keep in mind my bed floor is raised 3" so there is about 5" of space from the frame to floor.
Any issues I'm not seeing would be appreciated. I'm thinking later I will cut a patch in the floor and hinge it so I could easily get to that stuff.
Sent from my iPhone using Tapatalk
Before
Mocked up, keep in mind my bed floor is raised 3" so there is about 5" of space from the frame to floor.
Any issues I'm not seeing would be appreciated. I'm thinking later I will cut a patch in the floor and hinge it so I could easily get to that stuff.
Sent from my iPhone using Tapatalk
Last edited: