Bagged_Sierra's Interior build

Bagged_Sierra

Bagged_Sierra

New member
Apr 27, 2013
227
13
0
Fort Lupton, Colorado
I figured I would start a build thread on for the interior for my ride and I will post all the pics and info on what I have in in plan for it. Since interior work is out of my skill set I have a guy on the North Side of Houston doing this for me. My dash was cracked in the famous spots where all GM Trucks crack, over the gauge cluster and by they air bag on the passenger side, so I pulled the dash out and dropped it off to be covered in black leather and black gator inserts on the part above the Gauge Cluster, passenger airbag and the lid of the cubby hole above the glove box. I think it came out good with the red stitching.




Next up is finding some second row buckets from a Tahoe/Yukon and get them in the back, also going to move the jump seat to the rear between the to buckets. Getting a center console built to hold my air guages, and 1 D.A.D 12" sub. Plan on getting a Ipad mini installed in the dash with the head unit set back behind it. All the seats with be black with the same gator inserts with red stitching.

I will update this thread when I get more done, I picked the dash up yesterday on the way to work, so I when I get back from these 28 days I will get it in and get some pics of it installed in the truck.
 
Been a while but I finally got the back seats done, it went pretty good just had to cut a couple of spacers for the jump seat and drill some holes to bolt it down. I took the 60 side of the seat apart and cut the frame down and welded it to fit, then had a local shop cut the seat foam and leather down and sew it back together. I still have a few small things to tweak, but I think it looks like it could have came from the factory like this and that is kinda what I am going for. On to the pics......
 
Awesome dude. Love the leather dash. Not a fan of the gator insert but still killer dash. Like the the jump in the back

Sent from my SM-G920V using Tapatalk
 
What's name of shop in North Houston that did dash? I found a decent shop but he all the way by Hobby. Wouldn't mind someone on the northside.

Sent from my SAMSUNG-SM-N910A using Tapatalk
 
LSUEEMBA said:
What's name of shop in North Houston that did dash? I found a decent shop but he all the way by Hobby. Wouldn't mind someone on the northside.

Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...

Chino's Custom Interiors is the shop that did the dash in north Houston, if you want his number let me know i still have it saved on my phone somewhere
 
The shop in Houston finished up my console the other day, going to go pick it up around the 25th. Built to specs for 2 12" B2 Audio subs. Once it's installed with the subs I will post up some more pics.

 
Been busy and have not been on here much, made a couple of changes on subs since the D.A.D BD12's are in a redesigning phase and none were available anywhere. So I went with 2 12" Memphis Dual 2 Ohm M6 subs and I have them wired to 1 Ohm each and 2 Memphis 1000.1 Mono Amps, one for each sub. Needless to say, they beat, still running the stock head unit for now, but that will change pretty soon. I will get some pics tomorrow after I clean the ride up.
 
  • Like
Reactions: dszx13
You must log in or register to reply here.
Top Bottom